[DaveDee]

One of the most annoying features in the so called "Intelligent Safety Systems" is steering intervention under lane keeping.
The checkbox for this kept your setting in memory so turning if off would keep it off but now it comes on each ignition cycle.
From a conversation with a Master Tech this is as a result of an update from BMW in the later firmware revision.
As a result we need to turn to Bimmercode and I’m sure it will need to be done in expert mode
Does anyone know the code for this either to add it to memory setting between ignition cycles (like the stop start) or maybe change the speed at which it comes in
Hope there’s a solution out there, maybe Bimmercode might include it in the next update

[jga2022]

Originally Posted by DaveDee

One of the most annoying features in the so called "Intelligent Safety Systems" is steering intervention under lane keeping.
The checkbox for this kept your setting in memory so turning if off would keep it off but now it comes on each ignition cycle.
From a conversation with a Master Tech this is as a result of an update from BMW in the later firmware revision.
As a result we need to turn to Bimmercode and I’m sure it will need to be done in expert mode
Does anyone know the code for this either to add it to memory setting between ignition cycles (like the stop start) or maybe change the speed at which it comes in
Hope there’s a solution out there, maybe Bimmercode might include it in the next update

I totally agree, this is very annoying, I hope to be able to turn this off permanently

[jpcoop]

Huh? What software version? I turned this off the day I bought the car and it has stayed that way since

[P_Chris]

Originally Posted by jpcoop

Huh? What software version? I turned this off the day I bought the car and it has stayed that way since

Same here.

[DaveDee]

Originally Posted by jpcoop

Huh? What software version? I turned this off the day I bought the car and it has stayed that way since

Might be one of 2 possibilities
It's regional
or
Yours might be a pre November version of the firmware. I was advised yesterday by a BMW Senior Tech that BMW have now changed this setting in all new firmware.

[Vudumonkey25]

Is it possible your under a guest key and not your profile?

Mines been off since day 1. November pick up
It remembers everything.

I really hope a new firmware doesn't change that

[DaveDee]

Originally Posted by Vudumonkey25

Is it possible your under a guest key and not your profile?

Mines been off since day 1. November pick up
It remembers everything.

I really hope a new firmware doesn't change that

It might be regional but I suspect not. The firmware I have was late November and there’s another just been released.
Bimmercode has not released an update for a while so here’s hoping it might be included in the new update, I saw similar posts in the G20 forums, some have it in memory others don’t
I had a M235i before this and it retained the setting between ignition cycles

Bimmercode is really the best answer, and hopefully will bring official support for the BMW G42in the next release

[DaveDee]

Just for comparison my Firmware version is : 11/ 2021.61

[xcelir8bmw]

Mine is off from day 1 and I see no Bimmercode options.

[jpcoop]

Originally Posted by DaveDee

Just for comparison my Firmware version is : 11/ 2021.61

I’ll check next time I’m in the car but I’m 97% sure it’s older than that (I took delivery in early December)

[Vudumonkey25]

Originally Posted by Vudumonkey25

Is it possible your under a guest key and not your profile?

Mines been off since day 1. November pick up
It remembers everything.

I really hope a new firmware doesn't change that

Checked my firmware it's 07/2021.55

[P_Chris]

I have 11/2021.61 and it stays off.

[DaveDee]

Originally Posted by P_Chris

I have 11/2021.61 and it stays off.

If that's the case it could be regional, good news for USA and users of Bimmercode. Should be an easy fix if it is regional
Thanks for that info

[danallxt]

If you can't turn it off, try turning down the intensity, that helps a lot.

[DaveDee]

Originally Posted by danallxt

If you can't turn it off, try turning down the intensity, that helps a lot.

Thanks for that, yes I’ve done that.
Been onto Stephen at Bimmercode too, I hope it doesn’t filter across to you guys too.
We have a few things like that on Right Hand drive cars, Stop start (which fortunately can be coded out) I think because of odd legislation they have in the UK other RHD countries inherit the coding for those countries as our market is nowhere the size of the US market

[Evilmoretea]

Originally Posted by DaveDee

One of the most annoying features in the so called "Intelligent Safety Systems" is steering intervention under lane keeping.
The checkbox for this kept your setting in memory so turning if off would keep it off but now it comes on each ignition cycle.
From a conversation with a Master Tech this is as a result of an update from BMW in the later firmware revision.
As a result we need to turn to Bimmercode and I'm sure it will need to be done in expert mode
Does anyone know the code for this either to add it to memory setting between ignition cycles (like the stop start) or maybe change the speed at which it comes in
Hope there's a solution out there, maybe Bimmercode might include it in the next update

Any update on this. Just picked Uk my car today and hate that I can't have the steering intervention save as off under individual!

[allfitat55]

Ditto on this Aus region mine resets on Inginion restart. I was doing a BMW club drive went to take the 1st corner and the steering intervened stuffing that corner. I really don't want this muscle memory where need to remember to turn it off every time I start the car.

[DaveDee]

Originally Posted by allfitat55

Ditto on this Aus region mine resets on Inginion restart. I was doing a BMW club drive went to take the 1st corner and the steering intervened stuffing that corner. I really don't want this muscle memory where need to remember to turn it off every time I start the car.

I’ve contacted BMW on this and even suggested it could cause a danger to cyclists when you cross a line to give them space, the car could correct right back into them but they didn’t see the funny side and are standing firm on keeping it in according to a BMW Tech I know
Given it’s still selectable to memory in USA it will be a regional thing so I’m sure there’s a solution.
Bimmercode have not indicated interest but there could be a local coding solution and I’ll follow through on that.

[allfitat55]

Originally Posted by DaveDee

Bimmercode have not indicated interest but there could be a local coding solution and I’ll follow through on that.

Let me know if you need any help pretty Geeky being in the IT industry. happy to help test and dev

[DaveDee]

Originally Posted by allfitat55

Let me know if you need any help pretty Geeky being in the IT industry. happy to help test and dev

Thank you I'm sure it will be in the advanced area in Bimmercode as you have access to pretty much everything there that is editable. I'm not in that level of IT but I'm sure there are a few who can do that. One of our friends here is an Aircraft Engineer and coder and the go to guy for difficult stuff like that so I'm going to ask him to have a look and see what happens.
If it can be done with stop start and other menus it's just a matter of knowing where to look

[allfitat55]

Originally Posted by DaveDee

Thank you I'm sure it will be in the advanced area in Bimmercode as you have access to pretty much everything there that is editable. I'm not in that level of IT but I'm sure there are a few who can do that. One of our friends here is an Aircraft Engineer and coder and the go to guy for difficult stuff like that so I'm going to ask him to have a look and see what happens.
If it can be done with stop start and other menus it's just a matter of knowing where to look

Look like the G20 owners are getting it done via BMW with OTA pending. Not sure if this will filter down to G42 or our region. https://g20.bimmerpost.com/forums/sh...1755297&page=5

[bmwloverm2]

Got my G42 on friday and I can confirm this is happening to me too.

And i confirm this is ANNOYING AF... each time i forgot to disable it, i have to disable it after it acts while i'm driving, so i have to disable it during the drive which i hate it....