[Mr.McNutty]

Originally Posted by izzyM2

I just set up one of the preselected auto seat position button far enough so I don’t hit those areas during egress and ingress.

I also saw this product, looks like a good solution for the hard to reach seat belt with the buckets.

https://www.ebay.com/itm/38684537830...mis&media=COPY

Thanks for the input. I just ordered something similar for the seatbelt area.

Do you just have the default seat position set all the way back then when you get in you hit the other preset to move the seat back into position?

I get into the car pretty gingerly, but I'm also worried about rubbing my leg on the wheel while I'm avoiding the bolster.

[izzyM2]

[QUOTE="Mr.McNutty;31070855"]Thanks for the input. I just ordered something similar for the seatbelt area.

Do you just have the default seat position set all the way back then when you get in you hit the other preset to move the seat back into position?

I get into the car pretty gingerly, but I'm also worried about rubbing my leg on the wheel while I'm avoiding the bolster.

I do the opposite. My number 1 seat position is my driving position, then button 2 the seat is set positioned back and low and the back bolster is angled almost 45 degrees. I come in, push button 1, it automatically moves to my driving then I push button 2 after I turn off the car before exiting. If you push it when the engines are off you don’t need to hold it. It sounds cumbersome but it’s really not.

[Endz24]

Decided to go with some new shoes for the summer tires.

Vossen HF5 19x9.5ET10/20x10.5ET10 in satin silver

Had the iSweep 1500s installed at the same time. Thanks to the forum for turning me on to these. Night and day difference. Significantly less dust.

Only other mods that were done prior were front PPF, ceramic, 35% tint and Bavsound woofers.

[NoMoreVW]

Originally Posted by Endz24

Decided to go with some new shoes for the summer tires.

Vossen HF5 19x9.5ET10/20x10.5ET10 in satin silver

Had the iSweep 1500s installed at the same time. Thanks to the forum for turning me on to these. Night and day difference. Significantly less dust.

Only other mods that were done prior were front PPF, ceramic, 35% tint and Bavsound woofers.

The wheels look great. How is the bite on the 1500’s? Like many people I am wanting to get those pads.

[Bumpinjeep]

Hung out with a bunch if like minded individuals.

[LeggoRacing]

Break in service, finally.

[Drhoyle]

Added M performance front tow loop

[Geighty7]

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

[M2 CCO]

Originally Posted by Geighty7

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

Excited to see them mounted!

[Bumpinjeep]

Originally Posted by Geighty7

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

Just don't make the mortgage payment this month, problem solved.
They're going to look so good mounted.

[MASHCT]

Originally Posted by Geighty7

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

Looking forward to seeing those tires on these wheels. Hoping for nice straight sidewall.

[anthemavm]

Originally Posted by Endz24

Decided to go with some new shoes for the summer tires.

Vossen HF5 19x9.5ET10/20x10.5ET10 in satin silver

Had the iSweep 1500s installed at the same time. Thanks to the forum for turning me on to these. Night and day difference. Significantly less dust.

Only other mods that were done prior were front PPF, ceramic, 35% tint and Bavsound woofers.

Those wheels are nice, will have to check those out

[MineralGreyMetallic]

Originally Posted by Geighty7

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

Hell yeah, can't wait to see it.

[Geighty7]

Originally Posted by Bumpinjeep

Just don't make the mortgage payment this month, problem solved.
They're going to look so good mounted.

I volunteered my fiance to cover it this month. I’ll tell her about it in 3 weeks.

[JMcLellan]

Originally Posted by Geighty7

Well I broke my bank account on these bad boys today. Install is Monday- will report back.

20x10 et22
20x11 et24

Will be running
285/30/20 in front
305/30/20 in rear.

I love these so much. Looking forward to the install pics!

[Xspeedracer]

Pulled the trigger and got a set of 827m Gold 19”/20” wheels from Turner MS and ordered tires from tirerack

[Montaver]

Picked it up

[Drhoyle]

Added carbon fibre wing mirror caps from Carbon Accents. Much cheaper than OEM and perfect easy fit

[AZG87]

Mounted VT Forged SLAs on stock PS4s. Still waiting on the 3 piece center caps with CF center and ZB body color matching outer ring, so these are with the engraved ones that come default when ordered. Still looks great for being the included option. Though now I'm wondering if I want to drop the HAS down past the default, or maybe still wait til I wear out the stockers since I'll likely go just a tad wider.

Ceramic coating will be done next week on them as well.

[Connors5453]

Originally Posted by AZG87

Mounted VT Forged SLAs on stock PS4s. Still waiting on the 3 piece center caps with CF center and ZB body color matching outer ring, so these are with the engraved ones that come default when ordered. Still looks great for being the included option. Though now I'm wondering if I want to drop the HAS down past the default, or maybe still wait til I wear out the stockers since I'll likely go just a tad wider.

Ceramic coating will be done next week on them as well.

Looks great! Nice choice!

[Tag]

Originally Posted by AZG87

Though now I'm wondering if I want to drop the HAS down past the default, or maybe still wait til I wear out the stockers since I'll likely go just a tad wider.

I think all it needs now are some spacers to push the wheels out a bit more to fill in the wheel wells. Front looks like it needs more negative offset than the rears.

[AZG87]

Originally Posted by Tag

I think all it needs now are some spacers to push the wheels out a bit more to fill in the wheel wells. Front looks like it needs more negative offset than the rears.

Ya I removed 12mm spacers from the oem wheels when mounting these. I went 19x10 +11 front and 20x11 +8 rear and they are slightly more flush than the previous combo. Thinking when stock PS4s go will replace with slightly wider tires and will be right about where it needs to be. If not then at that point may look at adding small spacers back. Also considering bring the HAS lower past the port install 10mm height.