[MurphM240i]

Just thought I'd share my experience with this product.

https://www.aliexpress.us/item/32568...andl_shipto=US

Install: VERY easy process. Removal of the existing tips took minutes (only two screws per side). The fitment was great and snug—once tightened, they feel very solid with zero movement.

Quality: I was really impressed here. I wasn't expecting much since the price was so low but to my surprise, the fit and finish were great. They almost have a stock look/feel.

Price: As noted above, these tips are relatively cheap in price but surprisingly great on quality.

Overall, I'm extremely happy with this product. I love the look and achieved exactly what I was hoping for. Looks are subjective but I feel it makes the rear more aggressive.

[ZM240i]

Looks good for sure.

Your link shows a few different models. So you got the "Carbon Fiber J"?

[MurphM240i]

[QUOTE=ZM240i;29907792]Looks good for sure.

Your link shows a few different models. So you got the "Carbon Fiber J"?

No. I got black. I think the link just defaults to carbon for some reason.

[wb8164]

Looks great!
Thanks for sharing this info and providing an informative post

[viperx100]

They look great! Thanks for sharing the great photos and info. Very similar to WMS quad original black tips (before they went matte black) but without the logo on top. I would guess WMS might be higher quality but looks just about the same on the car.

[MurphM240i]

Originally Posted by viperx100

They look great! Thanks for sharing the great photos and info. Very similar to WMS quad original black tips (before they went matte black) but without the logo on top. I would guess WMS might be higher quality but looks just about the same on the car.

Thank you.

Yes, I originally wanted to order WMS but they no longer offered the original black tips. I also wasn't crazy about the logo on them—I prefer a more stock look.

[Bandit009]

Originally Posted by MurphM240i

Just thought I'd share my experience with this product.

https://www.aliexpress.us/item/32568...andl_shipto=US

Install: VERY easy process. Removal of the existing tips took minutes (only two screws per side). The fitment was great and snug—once tightened, they feel very solid with zero movement.

Quality: I was really impressed here. I wasn't expecting much since the price was so low but to my surprise, the fit and finish were great. They almost have a stock look/feel.

Price: As noted above, these tips are relatively cheap in price but surprisingly great on quality.

Overall, I'm extremely happy with this product. I love the look and achieved exactly what I was hoping for. Looks are subjective but I feel it makes the rear more aggressive.

Looks great! I like these as they don’t have the logo. I am
Keeping my stock so when everyone has quad tips mine will look different.

[perfectlyfrank]

They look great. I just ordered the same exact set.

[viperx100]

Originally Posted by perfectlyfrank

They look great. I just ordered the same exact set.

Ditto. Thanks to OP!

[Nicolas05]

They look great for sure! I have the exact same ones on mine since 6 months.

So just a little warning… Unfortunatly, they only lasted about 6 weeks before the gloss black paint started to flake.
The paint quality is really poor on these Aliexpress tips, and not resistant to the heat the exhaust produces.
I did not give up on them, as they do look good and are the perfect size! So had mine refinished at a quality dealer. They had them refinished in a high heat resistant black finish. Wich is more matte/satin look. And are holding great ever since.
The price of the refinish was about the same as the tips themselfs.
I was told that any high gloss black finish will most likely always flake off after a while.
Also the WMS ones are flaking apparently after a short time.

Just a heads up, that if it happens to you, there’s still a solution ;-)

[MurphM240i]

[QUOTE=Nicolas05;29919799]They look great for sure! I have the exact same ones on mine since 6 months.

So just a little warning… Unfortunatly, they only lasted about 6 weeks before the gloss black paint started to flake.
The paint quality is really poor on these Aliexpress tips, and not resistant to the heat the exhaust produces.
I did not give up on them, as they do look good and are the perfect size! So had mine refinished at a quality dealer. They had them refinished in a high heat resistant black finish. Wich is more matte/satin look. And are holding great ever since.
The price of the refinish was about the same as the tips themselfs.
I was told that any high gloss black finish will most likely always flake off after a while.
Also the WMS ones are flaking apparently after a short time.

Just a heads up, that if it happens to you, there’s still a solution ;-)

Thank you! I appreciate this input.

I figured they had to be too good to be true—price is right, install was easy and they look incredible. Fingers crossed I get some longevity out of them.

Thanks again for sharing your experience.

[AWcoupe]

That ThunderNight really pops in the sun! Great pics, was ready to jump on these but then the spoiler alert....flaky paint. Bummer. Keep us posted on how yours hold up.

[viperx100]

Originally Posted by Nicolas05

They look great for sure! I have the exact same ones on mine since 6 months.

So just a little warning… Unfortunatly, they only lasted about 6 weeks before the gloss black paint started to flake.
The paint quality is really poor on these Aliexpress tips, and not resistant to the heat the exhaust produces.
I did not give up on them, as they do look good and are the perfect size! So had mine refinished at a quality dealer. They had them refinished in a high heat resistant black finish. Wich is more matte/satin look. And are holding great ever since.
The price of the refinish was about the same as the tips themselfs.
I was told that any high gloss black finish will most likely always flake off after a while.
Also the WMS ones are flaking apparently after a short time.

Just a heads up, that if it happens to you, there’s still a solution ;-)

Thanks for the info! You got photos of the refinished tips? I am curious to see how your matte/satin tips look with the high gloss "diffuser".

[CarsAndGuitars]

Originally Posted by viperx100

Thanks for the info! You got photos of the refinished tips? I am curious to see how your matte/satin tips look with the high gloss "diffuser".

I just ordered the "silver" finished ones. If the finish fails, I will scuff-sand and recoat with a high heat primer / satin aluminum / clear for a low gloss finish.

The original factory exhaust exits are not high gloss, so a matte / satin finish on quads should look fine.

[perfectlyfrank]

Mine showed up today. I haven't put them on yet. I was surprised at how fast they came. 6 days from order to delivery in Florida. Hopefully, the finish will hold up. If not, I guess I will have them powder coated.

[CarsAndGuitars]

Originally Posted by perfectlyfrank

Mine showed up today. I haven't put them on yet. I was surprised at how fast they came. 6 days from order to delivery in Florida. Hopefully, the finish will hold up. If not, I guess I will have them powder coated.

Mine are right behind yours. I ordered 3/10, ETA 3/16.

Post pics when you can

[perfectlyfrank]

Originally Posted by CarsAndGuitars

Mine are right behind yours. I ordered 3/10, ETA 3/16.

Post pics when you can

I just put them on. Pretty easy.

[viperx100]

perfectlyfrank Looks great! Thanks for the photos. I already got mine in the mail today and when I put them on, I'll post pics on what they look like on my Melbourne Red.

[CarsAndGuitars]

Amazingly, mine arrived in only 4 days from order, but then again shipping isn't cheap. I will be installing after work today

[CarsAndGuitars]

Couldn't wait for end of the work day.. Installed (might need a tweek or 2)..

..and get to show off my plate, you can guess the rest

[CarsAndGuitars]

more pics..

[P_Chris]

This thread motivated me to install a silver set I’ve had for a few months.

Let me say, this is not for those with OCD lol. Spent longer then I should have aligning them.

I found to tighten the top Allen, loosening the exhaust hanger just to the last threads and a stubby ratchet gives enough room to tighten.