[AdonisP91]

For anyone that has this Can Do device, can you configure it to change the head up display settings? Every time I select Sport or Sport individual my heads up display settings revert to default instead of remembering my last used setting.

[canDO_Stef]

Originally Posted by Viffermike

Installed my canDO+ last weekend. A few notes:


- Browser-based WiFi WLAN interface is convenient and nice, but slow; it takes up to 15 seconds for a 'view' to populate visually after making selections. Also, some settings saved to flash memory would be lost when 'dragging' multiple steps within a Trigger sequence to reorder the sequence, probably because of the slow connection.

Hello Viffermike! This is 100% abnormal. It can sometimes happen that initial load is a little slower than at other times (on the order of 5 seconds), but interactions should be instantaneous. Please see:

which shows an example of what is to be expected.

Feel free to reach out to me so we can troubleshoot this together.

Originally Posted by Viffermike

- Using delays in sequences is mandatory in places. For 'Engine Start', I had to use a 1-second delay to get M Sport Mode to 'take' consistently, and the same to get both 'Steering Sport' and 'Brakes Sport' to both 'take' as default Setup choices.

Yes, sometimes the car needs time before it's ready to "listen", such as when the display is animating. Engine Start is on the longer side of animations and requires a couple of second, iDrive screens are usually OK with a few hundred milliseconds. I would say the majority of sequences won't require delays.

Note that the device ALWAYS adds a 0.05 delay between Actions.