BimmerLink doesn't officially suport G42. Anyone tried it?

bmwloverm2 · 06-05-2022, 11:28 AM

Hi all,

I'm about to get my G42 this week and as I always do with all new cars, I check myself with a OBD diagnosis tool to see if "everything is OK" the day I get my car + next days/weeks I keep an eye on it. Generally cheap & good practice...

Thing is that BimmerLink ( https://www.bimmerlink.app/ ) (I don't know if i am allowed to paste URL's in here, (admin) delete it if it shouldn't be here) doesn't officially support G42...

Anyone that has this diagnosys tool has already tried it?

Thanks in advance

conradb58 · 06-05-2022, 12:45 PM

Quote:

Originally Posted by bmwloverm2

Hi all,

I'm about to get my G42 this week and as I always do with all new cars, I check myself with a OBD diagnosis tool to see if "everything is OK" the day I get my car + next days/weeks I keep an eye on it. Generally cheap & good practice...

Thing is that BimmerLink ( https://www.bimmerlink.app/ ) (I don't know if i am allowed to paste URL's in here, (admin) delete it if it shouldn't be here) doesn't officially support G42...

Anyone that has this diagnosys tool has already tried it?

Thanks in advance

Yes I've used it. It doesn't allow me to permanently open the exhaust flaps it wants to stay on the auto setting. BimmerCode works just fine.

bmwloverm2 · 06-05-2022, 02:43 PM

conradb58 if you are looking for an easy way to put your flap always open without software... take a look to the post in here where it shows the fuse to pull that only acts for the flap:

https://g42.bimmerpost.com/forums/sh...highlight=fuse

Jashue · 06-05-2022, 05:40 PM

Quote:

Originally Posted by conradb58

BimmerCode works just fine.

Not yet, it doesn't.

conradb58 · 06-05-2022, 05:42 PM

Quote:

Originally Posted by Jashue

Quote:

Originally Posted by conradb58

BimmerCode works just fine.

Not yet, it doesn't.

I coded my car the first day I got it. I'm not in the game of making stuff up just to say something.

Jashue · 06-05-2022, 05:47 PM

Quote:

Originally Posted by conradb58

I coded my car the first day I got it. I'm not in the game of making stuff up just to say something.

So you can code a G42 using F22, F23, or F87?
Cool.
I had not tried!

jpcoop · 06-05-2022, 05:52 PM

Quote:

Originally Posted by Jashue

So you can code a G42 using F22, F23, or F87?
Cool.
I had not tried!

No, you use the G20 setting, since they're almost the same car.

conradb58 · 06-05-2022, 05:53 PM

Quote:

Originally Posted by Jashue

Quote:

Originally Posted by conradb58

I coded my car the first day I got it. I'm not in the game of making stuff up just to say something.

So you can code a G42 using F22, F23, or F87?
Cool.
I had not tried!

3 Series, M3 works the best in my experience.

There is options to code it just isn't as many options as it would offer with full support.

MPR · 06-05-2022, 05:56 PM

You can completely disable engine stop start?

NoSuchSol · 06-05-2022, 06:27 PM

Quote:

Originally Posted by MPR

You can completely disable engine stop start?

Yes - disable or there's a memory function to the last input you made.

ReallyRadams · 06-05-2022, 07:26 PM

Biimercode does, first thing I did was turn on auto start/stop memory.

MPR · 06-05-2022, 07:29 PM

I'm a newb to BMWs, what's the cheapest way for me to code with bimmercode

allfitat55 · 06-05-2022, 08:03 PM

I have Used Bimmercode for afew things using G20 settings.

One that does not work is assisted driving view in the cockpit.

You can code it but you wont get a display in the cockpit view.

Might be an idea to start a what works what does not work in Bimmercode till our cars are supported,

MPR · 06-05-2022, 08:15 PM

Hoping someone figures out recoding no dazzle headlights

RockCrusher · 06-06-2022, 07:35 AM

Quote:

Originally Posted by ReallyRadams

Biimercode does, first thing I did was turn on auto start/stop memory.

Doesn't doing that risk the new car warranty?

With other cars a change to the engine controller's setup/configuration (applying a "tune" so to speak) sets a permanent error code which flags the dealer/factory the the engine controller software has been modified. This can render the warranty (at least on the engine and maybe drive train) null/void.

ReallyRadams · 06-06-2022, 08:22 AM

Quote:

Originally Posted by RockCrusher

Doesn't doing that risk the new car warranty?

With other cars a change to the engine controller's setup/configuration (applying a "tune" so to speak) sets a permanent error code which flags the dealer/factory the the engine controller software has been modified. This can render the warranty (at least on the engine and maybe drive train) null/void.

I’ve never heard of that. All I did was turn on a feature that was just off from the factory.

MPR · 06-06-2022, 09:14 AM

I recall reading that they can detect map/tune flashes, so maybe there's a flag for that section of memory, but not settings type of stuff?

Lord Two Hats · 06-06-2022, 10:15 AM

Quote:

Originally Posted by ReallyRadams

I’ve never heard of that. All I did was turn on a feature that was just off from the factory.

BMW's software they use to program their vehicles (kind of) recently got an update that allows the software to detect when the code in the ECU has been modified. I tested this out with a stock 2016 340i that I flashed to have the mirrors fold in when the car locks, after it was flashed when you plug the car in and it scans the ECU it pops up with a little fault code and error message that says "this vehicle has been modified". This message will void any warranty claims involving that vehicle I believe.

MrFoxy · 06-06-2022, 10:27 AM

Quote:

Originally Posted by bmwloverm2

conradb58 if you are looking for an easy way to put your flap always open without software... take a look to the post in here where it shows the fuse to pull that only acts for the flap:

https://g42.bimmerpost.com/forums/sh...highlight=fuse

I've done this and works perfectly!

Start the car in Sport+ then pull the fuse.

Shut the car off and restart and your good to go, valve open in comfort mode.

burkhacs · 06-06-2022, 10:34 AM

Quote:

Originally Posted by RockCrusher

Doesn't doing that risk the new car warranty?

With other cars a change to the engine controller's setup/configuration (applying a "tune" so to speak) sets a permanent error code which flags the dealer/factory the the engine controller software has been modified. This can render the warranty (at least on the engine and maybe drive train) null/void.

No, this is in no way an engine tune and nothing here will cause the engine/components to exceed stock parameters. This is more akin to changing settings in as secret preferences menu.

Shaddy66 · 06-06-2022, 11:11 AM

Quote:

Originally Posted by MrFoxy

I've done this and works perfectly!

Start the car in Sport+ then pull the fuse.

Shut the car off and restart and your good to go, valve open in comfort mode.

What fuse did u pull

I’ve been meaning to do this since I got my car

bmwloverm2 · 06-06-2022, 11:35 AM

Quote:

Originally Posted by Shaddy66

What fuse did u pull

I’ve been meaning to do this since I got my car

Just scroll down the link that in the post he is replying, you'll see a pic of the exact fuse to pull.

06-05-2022, 11:28 AM	#1
bmwloverm2 Private First Class 108 Rep 156 Posts Drives: BMW M240i 2022 Join Date: Apr 2021 Location: Undisclosed iTrader: (0)	BimmerLink doesn't officially suport G42. Anyone tried it? Hi all, I'm about to get my G42 this week and as I always do with all new cars, I check myself with a OBD diagnosis tool to see if "everything is OK" the day I get my car + next days/weeks I keep an eye on it. Generally cheap & good practice... Thing is that BimmerLink ( https://www.bimmerlink.app/ ) (I don't know if i am allowed to paste URL's in here, (admin) delete it if it shouldn't be here) doesn't officially support G42... Anyone that has this diagnosys tool has already tried it? Thanks in advance Last edited by bmwloverm2; 06-05-2022 at 11:40 AM..
	Appreciate 0 Tweet Quote

06-05-2022, 02:43 PM	#3
bmwloverm2 Private First Class 108 Rep 156 Posts Drives: BMW M240i 2022 Join Date: Apr 2021 Location: Undisclosed iTrader: (0)	conradb58 if you are looking for an easy way to put your flap always open without software... take a look to the post in here where it shows the fuse to pull that only acts for the flap: https://g42.bimmerpost.com/forums/sh...highlight=fuse
	Appreciate 1 MrFoxy379.50 Quote

06-05-2022, 05:56 PM	#9
MPR Colonel 1958 Rep 2,132 Posts Drives: 22 M240i Join Date: Jan 2011 Location: NJ iTrader: (0)	You can completely disable engine stop start?
	Appreciate 0 Quote

06-05-2022, 07:26 PM	#11
ReallyRadams Private First Class 53 Rep 109 Posts Drives: G42 230i Join Date: Jul 2018 Location: Palm Harbor, FL iTrader: (0)	Biimercode does, first thing I did was turn on auto start/stop memory.
	Appreciate 0 Quote

06-05-2022, 07:29 PM	#12
MPR Colonel 1958 Rep 2,132 Posts Drives: 22 M240i Join Date: Jan 2011 Location: NJ iTrader: (0)	I'm a newb to BMWs, what's the cheapest way for me to code with bimmercode
	Appreciate 0 Quote

06-05-2022, 08:03 PM	#13
allfitat55 Private First Class 124 Rep 154 Posts Drives: 2022 M240i Join Date: Apr 2022 Location: Canberra Australia iTrader: (0) Garage List 2022 BMW M240i [0.00]	I have Used Bimmercode for afew things using G20 settings. One that does not work is assisted driving view in the cockpit. You can code it but you wont get a display in the cockpit view. Might be an idea to start a what works what does not work in Bimmercode till our cars are supported,
	Appreciate 0 Quote

06-05-2022, 08:15 PM	#14
MPR Colonel 1958 Rep 2,132 Posts Drives: 22 M240i Join Date: Jan 2011 Location: NJ iTrader: (0)	Hoping someone figures out recoding no dazzle headlights
	Appreciate 0 Quote

06-06-2022, 09:14 AM	#17
MPR Colonel 1958 Rep 2,132 Posts Drives: 22 M240i Join Date: Jan 2011 Location: NJ iTrader: (0)	I recall reading that they can detect map/tune flashes, so maybe there's a flag for that section of memory, but not settings type of stuff?
	Appreciate 0 Quote