[VegasG42]

More specifically - the dual valve system for aftermarket catback exhausts.

So, simply enough, our factory exhaust has a single valve that opens and closes depending on whether you have the vehicle in Eco, Comfort, Sport etc. , which will allow more or less flow through the exhaust to increase or reduce sound level.

However, I see that there are available for sale, a few catback systems that have 2 flow valves.

And I also see that they also have available a powered unit for controlling the valves, that are engaged with a remote control.

So, once the aftermarket catback is installed , will Eco, Comfort, Sport, etc. no longer control the 2 valves? Or will the controller device with the remote control become the only means of control ? Or do both still work together ?

Here is a catback that has the dual valve system :

[felixlamb]

So that exhaust specifically looks to have vacuum operated valves. The standard valve on the G42 is electronically actuated, so I expect some sort of device would be required required to generate the vacuum for this exhaust (or you have to pull it from the engine). I believe some exhaust systems with controllers have settings to respect the OEM settings though.

I'm curious how dual valve systems work though, to achieve OEM settings (given OEM is one valve only). I assume the original connector goes through a splitter which then connects into both valves?

[mike@x-ph.com]

The stock exhaust is closed on comfort and open in wide open throttle, but it does not open all the way (up to 70%)

Customers get a valve controller to open the valves to 100% for more sound.

When you get an exhaust with valves, in most cases, those exhausts reuse the stock valve motor so that it will act exactly like stock.
You can still use the sports buttons to open the valves, but they only open to 70% without a valve controller, just like the stock system.

[VegasG42]

Originally Posted by mike@x-ph.com

The stock exhaust is closed on comfort and open in wide open throttle, but it does not open all the way (up to 70%)

Customers get a valve controller to open the valves to 100% for more sound.

When you get an exhaust with valves, in most cases, those exhausts reuse the stock valve motor so that it will act exactly like stock.
You can still use the sports buttons to open the valves, but they only open to 70% without a valve controller, just like the stock system.

Ah, okay, that makes sense now. I was trying to understand how the two systems worked together. Thank you

[mike@x-ph.com]

Originally Posted by VegasG42

Ah, okay, that makes sense now. I was trying to understand how the two systems worked together. Thank you

My pleasure

[G$Money]

I bought the Dahler controller second hand on this forum and it is Gucci. Cleanly mounted inside the trunk by the battery, and the remote is velcroed to the back wall of the compartment where the phone charging pad is. I mostly set the valve to always open and it stays that way until you change it

[VegasG42]

Originally Posted by G$Money

I bought the Dahler controller second hand on this forum and it is Gucci. Cleanly mounted inside the trunk by the battery, and the remote is velcroed to the back wall of the compartment where the phone charging pad is. I mostly set the valve to always open and it stays that way until you change it

Nice, thank you for the feedback.

Are you using the valve controller to operate the valve on the stock exhaust, or do you have an aftermarket catback?

[G$Money]

Originally Posted by VegasG42

Nice, thank you for the feedback.

Are you using the valve controller to operate the valve on the stock exhaust, or do you have an aftermarket catback?

No problem! On the stock exhaust

[TopG42]

Originally Posted by G$Money

No problem! On the stock exhaust

I unplugged the valve cable yesterday while it was in sport so does that mean mine is only open 70% at all times as opposed to the 100% you achieved from the controller?

[mike@x-ph.com]

Originally Posted by TopG42

I unplugged the valve cable yesterday while it was in sport so does that mean mine is only open 70% at all times as opposed to the 100% you achieved from the controller?

70% or less.

Note sport mode does not automatically mean the valves are open at 70%. It can fluctuate but reaches a max of 70% without a valve controller.
when you unplug the controller, it gets stuck in the current position.

[TopG42]

Originally Posted by mike@x-ph.com

70% or less.

Note sport mode does not automatically mean the valves are open at 70%. It can fluctuate but reaches a max of 70% without a valve controller.
when you unplug the controller, it gets stuck in the current position.

Time and time again you come in clutch with the info!
I will be ordering the sst exhaust valve controller from you soon then. I actually ordered it and cancelled because someone I know told me the valve unplug would work the same but what you just said makes alot more sense considering I unplugged it and was NOT WOT meaning theres no way its stuck at 100% open rn. Thanks again Mike!

[kudos]

I was under the impression sport was 70% but sport+ was 100%.

[whatthehuck]

the thing I still don't understand is why the aftermarket exhausts don't just include a valve controller that opens 100% AND is able to be controlled by the factory plugs. The whole valve system is already there, electrical wiring etc, seems like it wouldn't be any problem at all to just replace the valve motor with one that opens 100% and be done without having to rewire stuff.

[MPR]

I recall seeing a pic on the forums recently showing the valves open 100% using the fuse pull trick while in sports+. Can someone with a factory exhaust without aftermarket tips confirm the truth for us?

[mike@x-ph.com]

Originally Posted by MPR

I recall seeing a pic on the forums recently showing the valves open 100% using the fuse pull trick while in sports+. Can someone with a factory exhaust without aftermarket tips confirm the truth for us?

i have not seen that but why would you want to mess with the fuses when you can control the valves for ~$250 with a valve controller

[MPR]

Originally Posted by mike@x-ph.com

i have not seen that but why would you want to mess with the fuses when you can control the valves for ~$250 with a valve controller

Is this a trick/sarcastic question that is going over my head?

1. I like spending $0 instead of $250.
2. I never need it to be quiet.
3. Its a single fuse, not fuses. Easily reversible.

[oldbmwtech]

Originally Posted by MPR

Is this a trick/sarcastic question that is going over my head?

1. I like spending $0 instead of $250.
2. I never need it to be quiet.
3. Its a single fuse, not fuses. Easily reversible.

BTW, the valve does open 100% in sport+. There is another thread about this with photos but you can see for yourself.

[mike@x-ph.com]

Originally Posted by MPR

Is this a trick/sarcastic question that is going over my head?

1. I like spending $0 instead of $250.
2. I never need it to be quiet.
3. Its a single fuse, not fuses. Easily reversible.

If you want the valves open all the time, just unplug the valves and keep the valves open. You do not need to mess with the fuse and it also $0. thats not what the valve controller does.

This upgrade is for those who want the flexibility to switch back to quiet mode when needed. For example, I would never want my cold start with the valves open, and I would also not want them open when driving in the neighborhood early or late. Others may not want the valves fully open while picking up their kids from school, going to work, or taking clients.

[MPR]

Originally Posted by mike@x-ph.com

If you want the valves open all the time, just unplug the valves and keep the valves open. You do not need to mess with the fuse and it also $0. thats not what the valve controller does.

This upgrade is for those who want the flexibility to switch back to quiet mode when needed. For example, I would never want my cold start with the valves open, and I would also not want them open when driving in the neighborhood early or late. Others may not want the valves fully open while picking up their kids from school, going to work, or taking clients.

Removing the plug then exposes the plugs pins/plug to the conditions. Better to just remove the single fuse when the valves are open, the plug then remains connected and protected.

Agreed, if I was worried about having the valve closed for cold start or at night time then I would definitely consider the controller. IMO, the car is quiet enough with the factory exhaust system where you can drive in a neighborhood at night without making noise.

[Info@mad-us.com]

Originally Posted by MPR

Removing the plug then exposes the plugs pins/plug to the conditions. Better to just remove the single fuse when the valves are open, the plug then remains connected and protected.

Agreed, if I was worried about having the valve closed for cold start or at night time then I would definitely consider the controller. IMO, the car is quiet enough with the factory exhaust system where you can drive in a neighborhood at night without making noise.

Agreed. Our controller Will allow you to open fully 100% 50% or you can switch back to oem with the click of a button. If remotes aren't your thing you can also connect it to your homelink button on your mirror.