03-27-2024, 08:42 PM | #1 |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
M2 making Helicopter like sound
Took my car out for a spin today. The temps were in the mid to high 50s. I’m on Michelin stock summer tires. When driving 40-50 miles per hour I notice a helicopter like sound coming from the tires as they rotated. There is also slight shaking on my passenger seat as well. I figured maybe the tires needed some time to warm up, but it never went away. I took the car on the highway to test it out at higher speeds. At 80+ mph it shakes much more, but there are times where the shaking stops and it’s a very smooth ride. What could this possibly be?
I’m the only one who drives the m2, didn’t hit any potholes so it can’t be any bent wheels. I also checked all the brake shields for rocks, didn’t find any. They used to get stuck in my previous f80 all the time and make crazy sounds. Also, the m2 doesn’t shake when braking Updated to add Video https://youtube.com/shorts/KhUZBsMX9...P7nPxBRU11wL2f |
03-27-2024, 09:33 PM | #2 | |
this is the way
20449
Rep 9,047
Posts |
Quote:
Did you recently swap winter wheels for summer wheels? Have any of the wheels been removed for any reason such as repairing a flat tire, suspension work, mods, etc.? |
|
Appreciate
0
|
03-27-2024, 09:42 PM | #3 |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
Car wasn’t stored. Driven weekly on days like this. I ended up with a nail in my rear tire 2 weeks after taking delivery. That’s the only time a wheel was taken off to plug it. However, that was months ago. I recently checked the lug nuts on the wheel just to make sure. The car is completely stock
|
Appreciate
0
|
03-27-2024, 09:44 PM | #4 |
First Lieutenant
720
Rep 396
Posts |
blistered sidewall? loose suspension component?
__________________
2022 M850i
2023 M2; MCS 3-way coilover, Vorshlag Camber plates, 19" Apex VS-5RS, SPL links, Adro wing, IRL exhaust, Verus Splitter, MAD downpipes, Bootmod3; IG:g87_43 |
Appreciate
0
|
03-27-2024, 09:53 PM | #5 | |
this is the way
20449
Rep 9,047
Posts |
Quote:
|
|
Appreciate
0
|
03-27-2024, 10:05 PM | #6 | |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
Quote:
|
|
Appreciate
1
Tag20448.50 |
03-28-2024, 12:19 PM | #7 | |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
Quote:
|
|
Appreciate
1
chris7197628.50 |
03-28-2024, 03:41 PM | #8 |
this is the way
20449
Rep 9,047
Posts |
Well that sucks. Are you going to try to pull it out and hope itt didn’t go through all the way or just take it in?
|
Appreciate
0
|
03-28-2024, 04:05 PM | #9 | |
Private
72
Rep 61
Posts
Drives: 2024 M2, 2024 GR Corolla
Join Date: Jul 2023
Location: NorCal
|
Quote:
Until I ran over a screw 2 days ago... |
|
Appreciate
0
|
03-28-2024, 09:12 PM | #10 |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
|
Appreciate
0
|
03-29-2024, 11:23 AM | #11 |
Second Lieutenant
473
Rep 232
Posts
Drives: 2017 M3
Join Date: Apr 2018
Location: Connecticut
|
Updated post to add video of the sound. Looking like a trip to the stealership soon
|
Appreciate
0
|
03-29-2024, 10:50 PM | #12 |
Christmas Poo
1652
Rep 1,428
Posts |
My guess would be a wheel/tire issue if it’s vibrating in and out of phase at different speeds - out of balance, bent rim, if spacers one is off center or not flush with the hub, if you ceramic coated the rims and did the hubs then your balance weights could be off as the solvent from ceramic coating can affect their adhesive causing them to “slide” out of position. Honestly shooting from the hip here…drive up and down the street and have a friend take a look for any wheel wobble.
__________________
Drive the Manual - 2024 G87 - Mr. Hankey's M2 Build Thread
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|