Aeroflow Dynamics gloss black front splitter

JABCAT · 08-15-2024, 07:51 PM

Placed an order for the Aeroflow Dynamics gloss black abs front splitter that was shown in another thread.

$199 plus free shipping. Ordered on Monday and it arrived in TX today via UPS. It comes in three sections, and each packaged nicely in plastic and then a fabric bag. Right off the bat, the quality feels 100% better than the Maxton pieces I previously ordered. The Maxton pieces were very flimsy, this splitter feels much more solid. The painted finish is also better than that on the Maxton pieces as well.

I'm going to take it to my Xpel shop to get ppf'd & will then install. At this point I'm very happy with this purchase & hope these guys come out with some matching side skirts.

Will post more pics once installed.

https://www.aeroflowdynamics.com/pro...ab4cf246&_ss=c

BroDoze · 08-15-2024, 09:28 PM

So first - thanks. I just ordered one,
Second, what am I missing? I paid $199 + free shipping

LAGWAGN · 08-15-2024, 09:29 PM

Following closely!

PS - I think we still have a trade to make, if you’re still interested.

JABCAT · 08-16-2024, 06:28 AM

Quote:

Originally Posted by BroDoze

So first - thanks. I just ordered one,
Second, what am I missing? I paid $199 + free shipping

Yep, typo. $199

JABCAT · 08-16-2024, 06:29 AM

Quote:

Originally Posted by LAGWAGN

Following closely!

PS - I think we still have a trade to make, if you’re still interested.

Yes, sorry just been really busy getting ready to go back to Austin. I'll touch base.

JABCAT · 08-16-2024, 01:10 PM

Here it is installed. Couple tips/suggestions:

1. Remove the pre-attached double-sided tape & replace with thinner 3M vhb tape.

2. Test fit to see where to place the double-sided tape. The pre-attached tape was too close to the edge and would stick out/be noticeable when installed.

3. Make sure it's lined up before installing self-tapping screws. There are indentations on the underside where to install the screws.

Overall extremely happy with this front splitter for only $199. Dropping the car off at Xpel on Monday (they wanted it installed prior to ppf).

Stock ride height the splitter is about 6" off the ground

MG20i · 08-16-2024, 01:20 PM

Ok. I like that one. Quite a bit.

BroDoze · 08-16-2024, 04:14 PM

Great write up and pics! Mine has already shipped!

JABCAT · 08-16-2024, 04:28 PM

If you're installing by yourself, I installed each side section then connected the middle section to them.

turo · 08-17-2024, 09:09 AM

That looks great! I will definitely consider one whenever my Maxton inevitably bites the dust. Is there a seam where the three parts meet, and is it noticeable?

JABCAT · 08-17-2024, 10:15 AM

Quote:

Originally Posted by turo

That looks great! I will definitely consider one whenever my Maxton inevitably bites the dust. Is there a seam where the three parts meet, and is it noticeable?

There is a seam, if you zoom in on the pics you can see it. I don't think it's that noticeable. The expensive TRE splitters are also 3-pieces and have the same seams, fwiw.

Digitalprty · 08-17-2024, 11:22 AM

Looks good. Just ordered.

JHole · 08-17-2024, 12:43 PM

Quote:

Originally Posted by JABCAT

There is a seam, if you zoom in on the pics you can see it. I don't think it's that noticeable. The expensive TRE splitters are also 3-pieces and have the same seams, fwiw.

Really looks good. Can you give us a head-on shot? Anyone know if the top of the splitter will sit flush if you have a Mishi plate? Thanks.

JABCAT · 08-17-2024, 01:38 PM

Quote:

Originally Posted by JHole

Really looks good. Can you give us a head-on shot? Anyone know if the top of the splitter will sit flush if you have a Mishi plate? Thanks.

It attaches to the bolts in front of where the mishimoto plate installs, so I don't see any issues.

JABCAT · 08-19-2024, 07:58 PM

Here's a few more pics. Took the car to Xpel today to get the splitter ppf'd. They were impressed & couldn't believe it was only $200. Imo, it's one of the best-looking currently available, and for the price just can't be beat

BroDoze · 08-19-2024, 08:17 PM

Looks great!

TiresAlwaysFlat · 08-20-2024, 01:08 PM

Do they have a side and rear to match?

JABCAT · 08-20-2024, 07:43 PM

Quote:

Originally Posted by TiresAlwaysFlat

Do they have a side and rear to match?

Not that I've seen on their website. I sent them an email inquiry but have not heard back.

Ehloo · 08-22-2024, 12:20 AM

i like how it doesn’t add too much to the front making undriveable. i am pretty low on ast HAS but really want some type of front lip to complete the front

Quote:

Originally Posted by JABCAT

Here's a few more pics. Took the car to Xpel today to get the splitter ppf'd. They were impressed & couldn't believe it was only $200. Imo, it's one of the best-looking currently available, and for the price just can't be beat

motorknut · 08-22-2024, 11:45 AM

Quote:

Originally Posted by TiresAlwaysFlat

Do they have a side and rear to match?

izzyM2 may know or share some info - he seems to know them well and mentioned in his own install thread that they are planning more designs.

fluffhead · 08-22-2024, 12:02 PM

Ordered one last night, already shipped.

BroDoze · 08-22-2024, 01:23 PM

Mine got here yesterday..

08-15-2024, 07:51 PM	#1
JABCAT Professor 3613 Rep 2,529 Posts Drives: '23 M2 & '22 X3 M Competition Join Date: Jun 2022 Location: Prosper, TX/Austin, TX iTrader: (0)	Aeroflow Dynamics gloss black front splitter Placed an order for the Aeroflow Dynamics gloss black abs front splitter that was shown in another thread. $199 plus free shipping. Ordered on Monday and it arrived in TX today via UPS. It comes in three sections, and each packaged nicely in plastic and then a fabric bag. Right off the bat, the quality feels 100% better than the Maxton pieces I previously ordered. The Maxton pieces were very flimsy, this splitter feels much more solid. The painted finish is also better than that on the Maxton pieces as well. I'm going to take it to my Xpel shop to get ppf'd & will then install. At this point I'm very happy with this purchase & hope these guys come out with some matching side skirts. Will post more pics once installed. https://www.aeroflowdynamics.com/pro...ab4cf246&_ss=c Attached Images __________________ Her's: '22 X3 M Competition, Marina Bay Blue, Tartufo full Merino interior. His: '23 M2, Toronto Red Metallic, M highlight interior. '11 Callaway SC652 Carbon Edition Corvette Z06. Inferno Orange Metallic. 1 of 3. Last edited by JABCAT; 08-16-2024 at 01:50 PM..
	Appreciate 7 BroDoze1517.00 BradMX5324.00 DarkNight707772.50 Digitalprty237.50 bmwimsafan28.00 Newgenbimmer169.50 ourlee1357.00 Tweet Quote

08-15-2024, 09:28 PM	#2
BroDoze Lieutenant Colonel 1517 Rep 1,966 Posts Drives: 2025 M2 LCI cometh Join Date: Nov 2009 Location: CO iTrader: (0)	So first - thanks. I just ordered one, Second, what am I missing? I paid $199 + free shipping __________________ ///M
	Appreciate 0 Quote

08-15-2024, 09:29 PM	#3
LAGWAGN Lieutenant 538 Rep 525 Posts Drives: 2001 M Roadster, '24 BSM M2 Join Date: Oct 2013 Location: Dallas, TX iTrader: (1)	Following closely! PS - I think we still have a trade to make, if you’re still interested. __________________ '01 M Roadster, '24 BSM M2
	Appreciate 0 Quote

08-16-2024, 01:10 PM	#6
JABCAT Professor 3613 Rep 2,529 Posts Drives: '23 M2 & '22 X3 M Competition Join Date: Jun 2022 Location: Prosper, TX/Austin, TX iTrader: (0)	Here it is installed. Couple tips/suggestions: 1. Remove the pre-attached double-sided tape & replace with thinner 3M vhb tape. 2. Test fit to see where to place the double-sided tape. The pre-attached tape was too close to the edge and would stick out/be noticeable when installed. 3. Make sure it's lined up before installing self-tapping screws. There are indentations on the underside where to install the screws. Overall extremely happy with this front splitter for only $199. Dropping the car off at Xpel on Monday (they wanted it installed prior to ppf). Stock ride height the splitter is about 6" off the ground Attached Images __________________ Her's: '22 X3 M Competition, Marina Bay Blue, Tartufo full Merino interior. His: '23 M2, Toronto Red Metallic, M highlight interior. '11 Callaway SC652 Carbon Edition Corvette Z06. Inferno Orange Metallic. 1 of 3.
	Appreciate 10 MG20i186.00 BradMX5324.00 BroDoze1517.00 reallymarkedup402.50 DarkNight707772.50 LAGWAGN537.50 turo212.00 Digitalprty237.50 Newgenbimmer169.50 izzyM2809.00 Quote

08-16-2024, 01:20 PM	#7
MG20i Second Lieutenant 186 Rep 297 Posts Drives: 2019 Mini Countryman S Join Date: Nov 2019 Location: N. Florida iTrader: (0)	Ok. I like that one. Quite a bit. __________________ Mike No more BMWs A truck and a couple motorcycles
	Appreciate 1 JABCAT3613.00 Quote

08-16-2024, 04:14 PM	#8
BroDoze Lieutenant Colonel 1517 Rep 1,966 Posts Drives: 2025 M2 LCI cometh Join Date: Nov 2009 Location: CO iTrader: (0)	Great write up and pics! Mine has already shipped! __________________ ///M
	Appreciate 1 JABCAT3613.00 Quote

08-16-2024, 04:28 PM	#9
JABCAT Professor 3613 Rep 2,529 Posts Drives: '23 M2 & '22 X3 M Competition Join Date: Jun 2022 Location: Prosper, TX/Austin, TX iTrader: (0)	If you're installing by yourself, I installed each side section then connected the middle section to them.
	Appreciate 2 BroDoze1517.00 azv31113.50 Quote

08-17-2024, 09:09 AM	#10
turo Lieutenant 212 Rep 487 Posts Drives: Yes Join Date: Jul 2011 Location: North VA iTrader: (2) Garage List 2011 BMW 335i [8.40] 2024 BMW M2 [9.00] 2018 BMW 340i XDrive [10.00]	That looks great! I will definitely consider one whenever my Maxton inevitably bites the dust. Is there a seam where the three parts meet, and is it noticeable?
	Appreciate 1 JABCAT3613.00 Quote

08-17-2024, 11:22 AM	#12
Digitalprty Private First Class 238 Rep 125 Posts Drives: 2024 M2 Join Date: Oct 2016 Location: CT iTrader: (0)	Looks good. Just ordered.
	Appreciate 1 JABCAT3613.00 Quote

08-19-2024, 07:58 PM	#15
JABCAT Professor 3613 Rep 2,529 Posts Drives: '23 M2 & '22 X3 M Competition Join Date: Jun 2022 Location: Prosper, TX/Austin, TX iTrader: (0)	Here's a few more pics. Took the car to Xpel today to get the splitter ppf'd. They were impressed & couldn't believe it was only $200. Imo, it's one of the best-looking currently available, and for the price just can't be beat Attached Images
	Appreciate 5 BroDoze1517.00 apez763.50 turo212.00 LAGWAGN537.50 *bimmervibe134.50 Quote

08-19-2024, 08:17 PM	#16
BroDoze Lieutenant Colonel 1517 Rep 1,966 Posts Drives: 2025 M2 LCI cometh Join Date: Nov 2009 Location: CO iTrader: (0)	Looks great! __________________ ///M
	Appreciate 2 apez763.50 JABCAT3613.00 Quote

08-20-2024, 01:08 PM	#17
TiresAlwaysFlat Enlisted Member 39 Rep 34 Posts Drives: power wheels Join Date: Oct 2023 Location: canada iTrader: (0)	Do they have a side and rear to match?
	Appreciate 0 Quote

08-22-2024, 12:02 PM	#21
fluffhead Enlisted Member 63 Rep 35 Posts Drives: '25 Manual M2 FPB Join Date: Nov 2023 Location: LI iTrader: (0)	Ordered one last night, already shipped. __________________ 2025 M2 Frozen Portimao Blue II Metallic \| M Color Seats \| Manual \| MP HAS \| Mods \| Accessories
	Appreciate 0 Quote

08-22-2024, 01:23 PM	#22
BroDoze Lieutenant Colonel 1517 Rep 1,966 Posts Drives: 2025 M2 LCI cometh Join Date: Nov 2009 Location: CO iTrader: (0)	Mine got here yesterday.. __________________ ///M
	Appreciate 0 Quote