[nissubaru]

I have INPA and all the other tools, if I should run diags let me know. Otherwise, any idea on these codes? Happened last night driving home from work. Occurred again today coming back from lunch. Car is lowered on Eibachs if that matters, I found some info on my searches with people throwing codes after lowering their car but mine has been this way for a while.

Battery is new. Alternator is also new. My car is an 09 335i rwd, 79k miles

2DC3 - DME: Monitoring, terminal 15.

CD94 - Message error (ambient
temperature/ relative time, 0x310), DME
receiver, instrument panel transmitter.

CD95 - Message (operation, cruise
control/ACC, 0x194) faulty, receiver DME,
transmitter DSC/ SZL/LWS/ ACC

CD98 - Message error (DSC torque
request, OxB6), DME receiver, AHM/ DSC
transmitter.

CD9C - Message (speed, 0x1A0) faulty,
receiver DME, transmitter DSC

CDAO - Message error (terminal status,
0x130), DME receiver, CAS transmitter.
CDA1 - Message (steering wheel angle,
0xC4) faulty, receiver DME, transmitter
DSC

CDA5 - Message (status, DSC, 0x19E)
faulty, receiver DME, transmitter DSC

CDA8 - Message (status, instrument
panel, 0x1B4) faulty, receiver DME,
transmitter KOMBI

CDAD - Message error (request, wheel
torque, drive train, OxBF), DME receiver,
DSC/ LDM transmitter.