03-29-2019, 07:22 PM | #1 |
Major
195
Rep 1,282
Posts |
Aftermarket lip
Hey guys I wanted to know what some of you are doing to secure your front lips beside 3m tape and screws. I was doing about 110mph today and the middle of my lip flew off. Before and after pics are below.
__________________
__________________
SOLD! X5 35i sdrive- JB4 SOLD! 435i- Cary Jordan E30 Tune~ Dinan Turbo~ BM3 trans tune~ XDI-35~ 3.5 T-map sensor~ VRSF HD FMIC~ VRSF Chargepipe~ VRSF Catless Downpipe~ CTS Intake~ FTP boost pipe~ FTP intake inlet~ FTP oil catch can~ Turbosmart dual bov~ |
04-04-2019, 12:08 PM | #2 |
First Lieutenant
102
Rep 387
Posts |
I believe its an installer error. Besides the push pins and 3m tape also the 10mm bolts you're suppose to screw new holes underneath at the center. Then towards the outside of the centers.
|
Appreciate
0
|
04-05-2019, 07:25 AM | #4 |
Colonel
1276
Rep 2,963
Posts |
__________________
2015 335i Msport/6 JB4/EWG/E30/VRSF DP/ER CP/ VRSF Race Exhaust/ Injen Intake/Verde Axis 19x8.5/9.5 245/35/275/30 Conti Extreme CS/ H&R Sports / Motorsport Hardware Stud Conversion
|
Appreciate
4
|
04-05-2019, 07:42 PM | #6 |
Private
29
Rep 86
Posts |
I just ordered a lip for mine and besides double sided tape it did come with hardware (clips screws etc) - it's currently getting painted right now and will be installed next week with my high kick spoiler. I didn't want the carbon fiber route
__________________
2017 - 340i M-Sport/Shadow w/ MPPSK / AFP Intake / Black MSport Wheels
|
Appreciate
0
|
04-05-2019, 08:44 PM | #7 |
Major
195
Rep 1,282
Posts |
The sides held just fine but the center blew off.
__________________
__________________
SOLD! X5 35i sdrive- JB4 SOLD! 435i- Cary Jordan E30 Tune~ Dinan Turbo~ BM3 trans tune~ XDI-35~ 3.5 T-map sensor~ VRSF HD FMIC~ VRSF Chargepipe~ VRSF Catless Downpipe~ CTS Intake~ FTP boost pipe~ FTP intake inlet~ FTP oil catch can~ Turbosmart dual bov~ |
Appreciate
0
|
04-06-2019, 06:49 AM | #8 |
A family of bimmers
2757
Rep 7,743
Posts |
I don't know of many roads in the US that has a speed limit that high.
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
04-12-2019, 11:10 PM | #9 |
BMW CCA Member
491
Rep 808
Posts |
FWIW - I have the EBAY front lip. On the 2nd one as my daughter smashed the first one on a parking block. Used NONE of the hardware that came with the lip. I used an 8mm nut and 8mm 1-inch bolt with a small washer for ALL the mounting points. The center I drilled 2-holes to accommodate that mounting point.
With the hits and air pressure the front end gets any type of self-tap-screw or push-expansion-pin just won't cut it. Even with my daughter hitting a parking block and cracking up the splitter, it STILL held on firm for weeks of highway driving until the replacement splitter arrived. |
Appreciate
1
oma3710194.50 |
Post Reply |
Bookmarks |
|
|