[JDM_240]

Figured I’d throw this on here since I had the car on the lift yesterday. I got photos of the exhaust from the cat back for all wondering

[tubingchamp]

Oh, sweet. So it goes straight from the downpipe, to the split, then the mufflers!

No resonator in the middle, eh? I guess that's why it sounds so good from factory

Are you planning on changing something up under there?

[JDM_240]

I’m planning on cat back as soon as Dinah or someone makes one. I may see the cost and process for a custom.

With there being no res in the MP, I’m thinking a single piped mp to a center split should work, there is a poss of even with a customer, utilizing the stock flap for comfort and sport calving

[shaman420]

Originally Posted by JDM_240

I’m planning on cat back as soon as Dinah or someone makes one. I may see the cost and process for a custom.

With there being no res in the MP, I’m thinking a single piped mp to a center split should work, there is a poss of even with a customer, utilizing the stock flap for comfort and sport calving

is the 340i exhaust different? wouldn't the quad back made by dinan fit? Looks very similar to me

[rashannon81]

It is based on the 3 series, looks like it will. I may have to call them see if they can test fit. Or I can be the teat bunny. Same with the downpipe!

[giolanzarin]

Originally Posted by rashannon81

It is based on the 3 series, looks like it will. I may have to call them see if they can test fit. Or I can be the teat bunny. Same with the downpipe!

The people from AWE told me that
Apparently there is a significant size difference between the 3 series and 2 series so the exhaust wouldn't fit perfectly. However, the exhaust routing of the Supra looks similar.

[Hendo741]

Originally Posted by giolanzarin

The people from AWE told me that
Apparently there is a significant size difference between the 3 series and 2 series so the exhaust wouldn't fit perfectly. However, the exhaust routing of the Supra looks similar.

Supra exhaust won't work. Muffler mounts on opposite side.

[giolanzarin]

Originally Posted by Hendo741

Supra exhaust won't work. Muffler mounts on opposite side.

So I guess we just have to wait for a company to make one for the G42?

[giolanzarin]

Originally Posted by Hendo741

Supra exhaust won't work. Muffler mounts on opposite side.

Would an exhaust for the previous generation m240i fit?

[Hpirx]

Originally Posted by giolanzarin

Would an exhaust for the previous generation m240i fit?

Probably not.
Last 2 Series was F platform (F22).
This generation is G platform (G42).
Different frame, dimensions, etc.