[R_Soul]

Had my Prem. pro for 2 weeks now. Been back to dealer for not recognising profile issue, now I noticed in the Energy Recuperation menu under the Adpative setting that “Due to vehicle recognition sensor failure this is unavailable.” (or something similar)
Anyone else had a similar message?

[lakmus]

Have you removed the protection film from the front radar yet?

[R_Soul]

Originally Posted by lakmus

Have you removed the protection film from the front radar yet?

👀 I will have a look at that 😅. I presumed the dealer would have sorted that - but the experience so far doesn’t give me faith.

It also appears that the Comfort Access and ‘kick to open’ boot have failed now too 🥺

[lakmus]

Originally Posted by R_Soul

👀 I will have a look at that 😅. I presumed the dealer would have sorted that - but the experience so far doesn’t give me faith.

It also appears that the Comfort Access and ‘kick to open’ boot have failed now too 🥺

Happened to see another post where someone was taking their car to service, until they noticed that the front radar had still the wrapper.. 😜

I've noticed 'kick to open' requires very sharp and quick movement under the bumper.

[Colh68]

Originally Posted by R_Soul

👀 I will have a look at that 😅. I presumed the dealer would have sorted that - but the experience so far doesn’t give me faith.

It also appears that the Comfort Access and ‘kick to open’ boot have failed now too 🥺

For the boot we have found you need to stand about an arm's length back from the badge and kick in and out quite quickly.

[R_Soul]

So had a look and there was no film on the radar, but checked in the settings and the error message has cleared - very odd!

Tried the ‘kicky boot’ as everyone suggested and it does work too! Needs a bit of a knack.

Same thing with the Comfort Access. I turned on the option for acoustic confirmation as I wasn’t confident in it locking and I’ve noticed that you need to stand next to the car until all doors etc are shut before walking away- or it doesn’t lock.