[mike@x-ph.com]

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:
Fastest flash times over ENET and CANBUS
Reliable and consistent connectivity
Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
Wireless CANBUS Support
Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing need for additional WiFi adapters or DCAN cables
V3 Version ONLY - NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
Enters ultra low power mode if left plugged in consuming just ~20mA
OTA updates through the new bootmod3 app
Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
V2A version of the adapter will trigger alarm on G series vehicles and 2020+ Toyota Supra. It is a lower cost option for those that don't mind unplugging their adapter after use
Manual Toggle switch to fully power down adapter
Small form factor, considerably smaller than generic WiFi ENET adapters
No VIN locking, can be used on multiple vehicles
Vehicles supported:
All BMW F and G series vehicles
2020+ Toyota Supra (A90 A91)
Additional 3rd Party applications supported:
ISTA / ESYS
XHP / xDelete
Bimmercode / Bimmerlink
...and other apps requiring ENET support

[Ivilla035]

Originally Posted by mike@x-ph.com

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:
Fastest flash times over ENET and CANBUS
Reliable and consistent connectivity
Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
Wireless CANBUS Support
Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing need for additional WiFi adapters or DCAN cables
V3 Version ONLY - NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
Enters ultra low power mode if left plugged in consuming just ~20mA
OTA updates through the new bootmod3 app
Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
V2A version of the adapter will trigger alarm on G series vehicles and 2020+ Toyota Supra. It is a lower cost option for those that don't mind unplugging their adapter after use
Manual Toggle switch to fully power down adapter
Small form factor, considerably smaller than generic WiFi ENET adapters
No VIN locking, can be used on multiple vehicles
Vehicles supported:
All BMW F and G series vehicles
2020+ Toyota Supra (A90 A91)
Additional 3rd Party applications supported:
ISTA / ESYS
XHP / xDelete
Bimmercode / Bimmerlink
...and other apps requiring ENET support

Apparently it has an on/off switch so you can leave it plugged in all the time? I have the orange/red MHD universal and its a bit annoying unplugging it everytime.

[lens]

Originally Posted by Ivilla035

Apparently it has an on/off switch so you can leave it plugged in all the time? I have the orange/red MHD universal and its a bit annoying unplugging it everytime.

Yes, and the V3 version you can leave it plugged on every car without triggering an alarm (supra and G series)

You also do not need to unplug in the V3 version or use the on/off switch as it goes into low power mode when you turn the car off.

I'm getting mine tomorrow.

[proTUNING Freaks]

Originally Posted by lens

Yes, and the V3 version you can leave it plugged on every car without triggering an alarm (supra and G series)

You also do not need to unplug in the V3 version or use the on/off switch as it goes into low power mode when you turn the car off.

I'm getting mine tomorrow.

+1

Toggle switch is for FULL power off and its available on V2A and V3. V3 goes low power mode automatically when plugged in and won't set off alarms on G series vehicles, consuming just 20mA, until you turn ignition back on.

[proTUNING Freaks]

Check out our YouTube channel showing the new bm3 WiFi adapter, various ways to connect with your vehicle and a sneak peak of the brand new bm3 app

[Ivilla035]

Originally Posted by lens

Yes, and the V3 version you can leave it plugged on every car without triggering an alarm (supra and G series)

You also do not need to unplug in the V3 version or use the on/off switch as it goes into low power mode when you turn the car off.

I'm getting mine tomorrow.

Dang lowkey that's super nice.

[XxThe_RemedyXx]

With the BM3 Wi-Fi adapter and iOS, does it also use cellular internet connectivity while connected to the car? Would I be able to run logs in real time and just have them save to the cloud automatically?

[WrxToBeamerGuy]

I have the Kies adapter currently and in order to get BM3 to work using Android I have to go briefly online and disconnect from the adapter and then go completely offline and reconnect to the adapter all within the App. It's been really annoying not having an internet connection while logging my car. Does this adapter fix that?

[n55david]

Originally Posted by WrxToBeamerGuy

I have the Kies adapter currently and in order to get BM3 to work using Android I have to go briefly online and disconnect from the adapter and then go completely offline and reconnect to the adapter all within the App. It's been really annoying not having an internet connection while logging my car. Does this adapter fix that?

Yeah I have to jump through hoops on android to make an adapter work.. its a huge pain in the fucking ass

[MTWO]

Originally Posted by XxThe_RemedyXx

With the BM3 Wi-Fi adapter and iOS, does it also use cellular internet connectivity while connected to the car? Would I be able to run logs in real time and just have them save to the cloud automatically?

You just copy the IP settings from the wifi connection and make it Manual instead of Automatic, copy the IP and Subnet Mask and make the Router thing empty. This keeps my internet and car connection alive full time on my iPhone.

[Groganrocket]

Originally Posted by MTWO

You just copy the IP settings from the wifi connection and make it Manual instead of Automatic, copy the IP and Subnet Mask and make the Router thing empty. This keeps my internet and car connection alive full time on my iPhone.

I just got mine today and it either doesn’t have internet or it’s not connected to the car any input greatly appreciated.

[morritse]

Originally Posted by MTWO

You just copy the IP settings from the wifi connection and make it Manual instead of Automatic, copy the IP and Subnet Mask and make the Router thing empty. This keeps my internet and car connection alive full time on my iPhone.

Is there any provision for this on Android? I end up just using a physical enet cable for everything most of the time because I can't stay connected to the internet with these wireless ones.

[lens]

Originally Posted by morritse

Is there any provision for this on Android? I end up just using a physical enet cable for everything most of the time because I can't stay connected to the internet with these wireless ones.

Android you can't connect internet and WiFi adapter at the same time.

Its recommend you turn on internet, download the map and set the config settings and then turn off internet and flash.

[TreDirtyFive]

Just for visibility...I accidentally left my new Wifi adapter v3 on my 2018 X3 M40i (G01:B581) and my alarm went off 2 times at night and I noticed significant battery drain. After taking it off I turned on the car and left it on for 10 minutes until the battery found 14.1+. It's all good now but I'm not sure everyone will have my same problems?

Otherwise, it works great.