[johnung]

Bootmod3- I tried to collect a log using the new redesigned BM3 app for the iPhone. But the gauges on the BM3 Dashboard were reading no values, all zeros! Multiple times tried reloading the BM3 app, and then deinstalling & reinstalling, but neither worked.

Serge in BM3 Tech Support told me the fix. Go all the way to the bottom to the BM3 ABOUT menu pick. Choose RESET DEFAULTS. Gauges immediately begin to show engine parameter values.

Hope this helps someone else.

[paimon.soror]

Heres another interesting one i found in my experiences with BM3 over the years.

If i start my car with my P3 Gauge plugged in... unplug the P3 Gauge, and then Plug in my ENET for BM3 - dashboard doesn't work

I need to shut the car off, then turn it back on for it to start working

If i start my car with the P3 Gauge **not** plugged in and then plug the ENET cable in ... dashboard works fine.

I wonder if the P3 Gauge is doing something funky

[johnung]

Originally Posted by paimon.soror

Heres another interesting one i found in my experiences with BM3 over the years.

If i start my car with my P3 Gauge plugged in... unplug the P3 Gauge, and then Plug in my ENET for BM3 - dashboard doesn't work

I need to shut the car off, then turn it back on for it to start working

If i start my car with the P3 Gauge **not** plugged in ... dashboard works fine.

I wonder if the P3 Gauge is doing something funky

That makes sense if P3 gauge is plugged in to the OBD

[paimon.soror]

yea the odd thing is order of operations. Wondering why unplugging p3 and then pluggin in the enet doesn't work, but if the p3 wasn't plugged in, and then i plug in enet, it works.

[mike@x-ph.com]

Originally Posted by johnung

Bootmod3- I tried to collect a log using the new redesigned BM3 app for the iPhone. But the gauges on the BM3 Dashboard were reading no values, all zeros! Multiple times tried reloading the BM3 app, and then deinstalling & reinstalling, but neither worked.

Serge in BM3 Tech Support told me the fix. Go all the way to the bottom to the BM3 ABOUT menu pick. Choose RESET DEFAULTS. Gauges immediately begin to show engine parameter values.

Hope this helps someone else.