[jhstjh]

Originally Posted by turnsignalslol

Please post some pictures when you get it and install it! Very interested in this OEM style application.

I finally received the part. It's a very sturdy piece and doesn't bend easily. Wasn't able to just slide it in through the front opening and tie it. Probably either need to remove the bumper or trim it down more🤔

[baron95]

Originally Posted by jhstjh

I finally received the part. It's a very sturdy piece and doesn't bend easily. Wasn't able to just slide it in through the front opening and tie it. Probably either need to remove the bumper or trim it down more🤔

Can you provide close in pictures on how you attached it?

Any tips as to the installation method to minimize dissassembly?

Thank you.

[Resoelg]

Zunsport. Easy install. Solid product. Best pic I have.

[M2Jorge]

DIY with ABS honeycomb sheet from amazon, had to cut to fit and secure with zip ties but the end results looks how the car should’ve came from factory.

[jhstjh]

Originally Posted by baron95

Can you provide close in pictures on how you attached it?

Any tips as to the installation method to minimize dissassembly?

Thank you.

I ended up not installing it. Trimmed the piece and it still won't bend and slide in. Very sturdy.

Someone else has done it here https://g87.bimmerpost.com/forums/sh...&postcount=116
and bumper needed to be removed.

[motorknut]

Has anyone tried or seen the Vorsteiner front mesh?

The pics look good - more upfront positioning, providing protection to both the front facing and bottom facing coolers. I can’t tell how they are secured, eg zip
Ties etc.

[bhutch]

I am also interested in the Vorsteiner front grille. I can't find any info on mounting.

[bhutch]

Do the Zunsport grilles chafe the plastic anyplace?

[JABCAT]

Originally Posted by bhutch

Do the Zunsport grilles chafe the plastic anyplace?

Not if you install them correctly.

[T-Rexx]

Originally Posted by M2Jorge

DIY with ABS honeycomb sheet from amazon, had to cut to fit and secure with zip ties but the end results looks how the car should’ve came from factory.

Attachment 3423564

Attachment 3423565

I like the looks of this.
Did you do the side vents too?
Also what description does this sheet have large holes, medium holes)?
Can you send me the link please

[mPlasticDesign]

Originally Posted by GregW / Oregon

Do you mean the brake duct openings? Don't see that those provide any paths to the radiators.

That's even a concern for the stock plastic grid that sets tight to the radiator, as I've got little debris stuck in there. All in all a BMW fail.

I think I like these horizontal slats more because the kidneys are horizontal. Would have to see a wider angle to be sure.

[fanofbmwe46]

Full zunsport front