[Expert@ApexWheels]

Originally Posted by jmg

Any photos of the VS-5RS on an Alpine White G87 in Bronze, Gold, and Anthracite?

Unfortunately, we don't have much with that exact configuration. Here is a link to the gallery, this will have any G87's that we have gotten access to photos. https://apexwheels.com/gallery/bmw/m2/g87

- Jasper

[wheels7676]

Hi guys,

Wondering if anyone has tried the following specs with Michelin Pilot 4S

20x10J ET13 285/30/20 Front
21x11J ET13 305/25/21 Rear

My car is not lowered. Mainly concerned about fender scrub.

Thanks in advance.

[puppydax]

This thread has guided me till I was ready to purchase. After perusing tire size and potential conflicts, I decided on 295 square with Continental ECS 2. Picked up my VS-5RS on Black Friday in 19x10.5 +18.

[Expert@ApexWheels]

Originally Posted by puppydax

This thread has guided me till I was ready to purchase. After perusing tire size and potential conflicts, I decided on 295 square with Continental ECS 2. Picked up my VS-5RS on Black Friday in 19x10.5 +18.

These photos turned out great, thanks for the support! I will get these added to our gallery.

- Jasper

[Expert@ApexWheels]

Our newly released ML-10RT is back with an all new diameter specifically for G87 M2s and G8X M3s and M4s. Our 20” fitments can now be pre-ordered and will arrive in June. A 15% discount is available on both these wheels and the 19” ML-10RTs will be available through February 28th.

15% Off All ML-10RT + Free Shipping*

If you missed your chance to get a discounted set during the launch pre-order or Black Friday now is your chance to lock in a deep discount through February 28th.

Our Monoblock take on this mesh lipped design brings modern forged features to a beloved classic aesthetic. Performance characteristics like strength, stiffness and weight were improved while the single-piece construction let us shape the spokes around critical brakes and up the concavity of our most popular fitments.

The 2 20” fitments offered in this design are our 20x10 ET8 and 20x11 ET18. If you’re pre-ordering the 20” wheels or a mixed set of 19”/20” wheels you’ll be charged a 25% desposit fee with the balance collected when the wheels arrive in June. The Pre-order Discount on the 20” wheels specifically will be ongoing through the 21st of March.

Seeing is Believing





Photo credit: Basicperformance_korea

We’ve seen a number of customers running these wheels after our initial launch. Check out our Gallery Pages to see more examples of these wheels on various BMWs.


We know what fits. From direct bolt-on to all-out race fitments and everything in between. We've street and track tested extensively to save you the trial-and-error.

View our fitment guides.

Questions?
Call: 925-245-0773
Email: expert@apexwheels.com
Web: www.apexwheels.com
Hours: M-F 9a-5p PST

*Free Shipping to the lower 48 Contiguous US states

[ApexWheels]

New Wheel design Survey

We’re looking for community feedback on new wheel designs! If you’re a fan of Apex wheels and would like to help shape new additions to our catalog, please take a few minutes to complete this survey: New Forged Design Survey

We love getting your feedback and thoughts on future designs. Thanks in advance for your participation!

[MikeyP]

Not sure this has been posted, but I thought Id share. I ordered the Apex VS5-RS 19x10 (front) and 20x11 (rear) and it looks like the Apex wheels are ~10lbs lighter, each. This is just a rim to rim comparison. Also, the factory Yoko rears looks to stretch a bit vs the factory Yoko fronts.

OEM
Front - ~30lbs each
Rear - ~31lbs each

Apex
Front - ~20lbs each
Rear - ~21.5lbs each

[ApexWheels]

Originally Posted by MikeyP

Not sure this has been posted, but I thought Id share. I ordered the Apex VS5-RS 19x10 (front) and 20x11 (rear) and it looks like the Apex wheels are ~10lbs lighter, each. This is just a rim to rim comparison. Also, the factory Yoko rears looks to stretch a bit vs the factory Yoko fronts.

OEM
Front - ~30lbs each
Rear - ~31lbs each

Apex
Front - ~20lbs each
Rear - ~21.5lbs each

Nice! You can also confirm our wheel weights on our site when you scroll down on the wheel page. (with the desired wheels selected)

Thanks!

- Jasper

[Saigonheat84]

Please bring ARC 8 back to the G87. I love the Arc 8

[ApexWheels]

Originally Posted by Saigonheat84

Please bring ARC 8 back to the G87. I love the Arc 8

We would love to continue the ARC-8's in the 5x112 BMW bolt pattern. Unfortunately, our ARC-8's can be an issue with the new M cars as the brakes are quite large and have a shape that interferes with the spokes of the ARC-8's due to the shape of the wheel face and profile.

- Jasper

[AGXTG]

For the G87 which set of VS-5RS would give you the flushest fitment? Don't really want to run spacers

Ideally I would want 19" front and 19" or 20" rears

[ApexWheels]

Originally Posted by AGXTG

For the G87 which set of VS-5RS would give you the flushest fitment? Don't really want to run spacers

Ideally I would want 19" front and 19" or 20" rears

If you are looking at keeping your OEM tires at the moment, and want to upgrade tire sizes in the future. Our 19x10 ET12 and 20x11 ET18.
This setup can utilize the OEM 275/35-19 and 285/30-20. In the future, you can go up to a 285/35-19 and 305/30-20.

Here is a car with that setup: https://apexwheels.com/gallery/bmw/m...hed-clear-2284

- Jasper

[ApexWheels]

Apex 5 Spoke Design Survey

We’re back to gather more information on a potential new design. The 5 spoke design we showcased in earlier surveys proved popular enough to be considered for further development. We’ve refined a few features and want to get more feedback from the community about this wheel specifically around finishes, fitments and chassis. If you’re interested in providing feedback about this design, please take a moment to complete this survey.

In addition to the bare wheel renders included in the survey, we’ve also rendered the design on the E46 M3 you see above. The wheels showcased above are profile 3 and on the more concave end of the spectrum. Profile 3 fitments are more commonly seen on BMW M models that need wider wheels with relatively low offsets.

This second image, while not a BMW, does a great job of showing off a profile 2 version of the wheel on a 2nd gen BRZ. This less aggressive profile would be more commonly seen on Non-M 3 series models in fitments like 18x9 ET30 or 18x9.5 ET35.

[LAGWAGN]

Does anyone have pictures of: 20X10 ET 8 F, 20X11 ET18 R? Bonus points for stock suspension height (4x4). I am about to pull the trigger but want to see the fitment first. I'm assuming this fitment would NOT require spacers.

[ApexWheels]

Originally Posted by LAGWAGN

Does anyone have pictures of: 20X10 ET 8 F, 20X11 ET18 R? Bonus points for stock suspension height (4x4). I am about to pull the trigger but want to see the fitment first. I'm assuming this fitment would NOT require spacers.

Here is a link to all of our G87 M2's running 20's. All three gallery posts are on the staggered 20x10/20x11 setup:

https://apexwheels.com/gallery/bmw/m2/g87?diameter=20

You shouldn't need any kind of spacers for this setup as it is extremely flush with the fenders as is. I cannot verify whether these cars are on stock suspension or not, but you can get a really good idea for the fitment.

- Jasper

[torentmonkey]

Hey, what's the diameter of the center hole on a vs5-re ? I know it's made to take no caps but I want to see what I can do for that. I like strong wheels but track only on ocasion

[ApexWheels]

Originally Posted by torentmonkey

Hey, what's the diameter of the center hole on a vs5-re ? I know it's made to take no caps but I want to see what I can do for that. I like strong wheels but track only on ocasion

There is no size of center cap that we offer that would work for the VS-5RE. If you want a forged wheel and occasionally track your car. I would recommend the VS-5RS as it is our lightest and strongest wheels that can support a center cap. Our VS-5RS's also come in many sizes that can be offered for your G87.

- Jasper

[torentmonkey]

Hey Jasper, thanks. I know. I make my own caps. Just want the diameter of the hole please