[mks]

Originally Posted by MASHCT

If you do the install on this one like BroDoze suggests (https://g87.bimmerpost.com/forums/sh...8&postcount=14), it would be hidden from view. And with the Dinan you have 5 included settings & #2 is OEM - the dealer will not know it's there.

Ok..took me about an hour (because old and have an arthritic back), but here's the "hidden" install. Yes, silly to try to show. I have other pics of the process if anyone is interested (not complicated, but you have to be a pretzel to manage it).



Deciding where to place the module was a bit of a trick, but there's a natural shelf on the right side (I zip tied it to an existing harness and attached a strip of Velcro to the module to stick to the carpet).

Originally Posted by MASHCT

But #5 - that's gonna put a shit-eating grin across your face, if it doesn't make you downright laugh out loud! It's a howl for sure!

This.

I've used a number of throttle boosters in my day from various manufactures. The Dinan unit proved a bit finicky to set up (all the relearning procedures, etc), but it works as intended. One feature I didn't think I'd enjoy (that other booster do not have) is the custom mapping feature--already have one that is super smooth and perfect for highway driving.

I've never had a dealership (Audi, BMW, Ford at least) give me a hard time about a throttle booster. However, I've also never had a problem with one and I always set it to stock when going in for service.

[MASHCT]

Originally Posted by mks

This.

I've used a number of throttle boosters in my day from various manufactures. The Dinan unit proved a bit finicky to set up (all the relearning procedures, etc), but it works as intended. One feature I didn't think I'd enjoy (that other booster do not have) is the custom mapping feature—already have one that is super smooth and perfect for highway driving.

I've never had a dealership (Audi, BMW, Ford at least) give me a hard time about a throttle booster. However, I've also never had a problem with one and I always set it to stock when going in for service.

You are the man! Looks great! Wanna guess what I am about to go do?

BroDoze Thanks for shaming me into a more professional install.

[BroDoze]

Did any of you disconnect the battery during install?

I hope that’s not necessary…

[mike@x-ph.com]

As RG said, to get the extra power and the throttle response change with Race Chip, you need to get the tuner + the XLR

With that said, with the extra power, the car becomes more responsive, so you might not need to adjust the throttle.

i recommend you take it step by step and start with the tuner, then decide on the XLR

[MASHCT]

Originally Posted by BroDoze

Did any of you disconnect the battery during install?

I hope that’s not necessary…

I didn't - no issues.

[mks]

Originally Posted by BroDoze

Did any of you disconnect the battery during install?

I hope that’s not necessary…

I did...no issues, but had to redo some settings. If I had to reinstall in the future for whatever reason, I wouldn't disconnect the battery--just for the sake of the inconvenience.

[MASHCT]

All better now.

BroDoze
mks

[BroDoze]

Looks great! ^^

[mks]

Originally Posted by BroDoze

Looks great! ^^

I second that!

[mks]

Just some follow up on the actual unit now that I've used it for a bit.

Pro:

1) The stock maps seem well suited for the car--even the extreme, 200%, setting is streetable. That's not been the case with some other TBs.
2) App interface is responsive.
3) No connection issues
4) Can create custom maps
5) Works well no matter what drive logic setting you're in or which function, i.e., drive or sequential mode--although sequential mode feels better...more predictable...more "fun"

Cons:
1) Can't "save" custom maps. Kinda They save but app doesn't preserve the visual curve...so one can't go back to make adjustments without starting from scratch each time (sent vid example to and corresponded with Dinan on this...they agreed and intimated they'd look into it
2) App has to be connected each time (doesn't auto sense the module)
3) Default screen is the config screen vice the levels screen (meh, not a big deal)
4) Slight (annoying) lag between remotre switch and App, e.g., one may press level 3 on the switch but not see the app update selection for a second or two (meh, not a big deal)

Beyond all that, I now find that the Dinan TB is a part of my daily driving experience. Aside, had my first run-in service with no problems from the dealer...I set the module to level 2 before dropping off.

[DrewNewM2]

Originally Posted by mks

2) Device has to be connected each time (doesn't auto sense the module)

You have to connect each time you drive the car?

[mks]

Originally Posted by DrewNewM2

You have to connect each time you drive the car?

Correct. Not a terrible inconvenience unless you're used to the the way many Bluetooth devices connect automatically once in proximity to whatever they are connecting to. In my experience, however, your last setting remains resident in the module, which can always be changed with the switch (which seems always to stay connected...I just tend to use the app more ). Just need to change my habit

[BroDoze]

Installed mine last night. Haven’t had any time to play yet. Hopefully tomorrow. The pairing piece and pedal learn was easy. App looks well built.

Gotta get through this break-in.

[MASHCT]

Originally Posted by BroDoze

Installed mine last night. Haven’t had any time to play yet. Hopefully tomorrow. The pairing piece and pedal learn was easy. App looks well built.

Gotta get through this break-in.

Wait until you feel the highest included setting. It's hilariously fun. LOL

[mks]

Originally Posted by BroDoze

The pairing piece and pedal learn was easy.

This was true for me, as well. Although, the reason I initially reached out to Dinan was that the LED sequence colors didn't match the setup instructions.



This was one reason I didn't "stealth" mount the module until I could confirm 1) the module was connected to the app and 2) the switch was connected to the module. Bottomline, everything did "relearn" and I've had no connection problems with the app or switch--both work well.

[BroDoze]

I never paired my switch. I’m only going to use the app.

[mks]

Originally Posted by BroDoze

I never paired my switch. I’m only going to use the app.

I use the app as well. Although, if I could find a mounting spot that's both accessible and unobtrusive at the same time, I'd "switch."

[MASHCT]

Originally Posted by mks

I use the app as well. Although, if I could find a mounting spot that's both accessible and unobtrusive at the same time, I'd "switch."

I put mine way at the top of the windshield next to the rear view mirror. Oddly I use the switch more than the app! LOL

[mks]

Originally Posted by MASHCT

I put mine way at the top of the windshield next to the rear view mirror. Oddly I use the switch more than the app! LOL

Ah, that location didn't occur to me--thanks!

[BroDoze]

Played with this yesterday. Wow! lol

Even the 150% tune is a massive adjustment. I tried the others and it is SO ridiculously sensitive, I had to back it down to the 150% increase. May mess more later after I’m fully adjusted to 150%.

[MASHCT]

Originally Posted by BroDoze

Played with this yesterday. Wow! lol

Even the 150% tune is a massive adjustment. I tried the others and it is SO ridiculously sensitive, I had to back it down to the 150% increase. May mess more later after I’m fully adjusted to 150%.

RIGHT?! Setting 5 (or 6?) is pretty nuts. Makes the shift from 1 to 2 really tough. LOL Certainly not smooth. I cant imagine that thing with a Racechip, etc or ECU tune.

Something so simple increases the fun factor exponentially.