[SpaceGhost]

Do we know if this will have limited function on the new idrive software in 2025 models? I know Bimmercode got nerfed a bit by the new software.

[canDO_Stef]

Originally Posted by SpaceGhost

Do we know if this will have limited function on the new idrive software in 2025 models? I know Bimmercode got nerfed a bit by the new software.

Hello,

no, it is unaffected by recent iDrive changes.

Stef

[J-RO]

Does anyone know of a G42 owner that has purchased this. Not sure what it can do on that vehicle. Any input canDO_stef?

[canDO_Stef]

Originally Posted by J-RO

Does anyone know of a G42 owner that has purchased this. Not sure what it can do on that vehicle. Any input canDO_stef?

Hello!

canDO+ supports the G42 and there are a few out there. The main differences are no M1/M2 buttons, so no Triggers, same for "M Mode", "Drift Mode", "Track Mode".

On the G42, you instead get Actions for

Sport Mode
Sport Plus Mode
Sport Individual Mode
Eco Mode
Eco Individual Mode

The rest of the functionality is the same.

If you are in the US, distribution is handled by Kies Motorsports, and afaik, their stock is G8X, so you have two choices: ask them to update the FW to G4X, or place the order and contact us for instructions specific to the G8X->G4X FW update. It's pretty easy either way!

[J-RO]

Originally Posted by canDO_Stef

Hello!

canDO+ supports the G42 and there are a few out there. The main differences are no M1/M2 buttons, so no Triggers, same for "M Mode", "Drift Mode", "Track Mode".

On the G42, you instead get Actions for

Sport Mode
Sport Plus Mode
Sport Individual Mode
Eco Mode
Eco Individual Mode

The rest of the functionality is the same.

If you are in the US, distribution is handled by Kies Motorsports, and afaik, their stock is G8X, so you have two choices: ask them to update the FW to G4X, or place the order and contact us for instructions specific to the G8X->G4X FW update. It's pretty easy either way!

Thank you.

[fluffhead]

Turns out that iDrive 8.5 doesn't code the same way as 8.0 for heated seats, so a custom action is required.

Stef over at canDO was very helpful and together via online chat figured it out. We were even able to figure out the Heated steering wheel action for 8.5.

Stef told me canDO would work on these findings for a future Firmware update. (I'm currently using v1.7.2)

The customer service and speed of communication is top notch.

So, for those with canDO and 8.5 that would like to have heated seats and steering wheel associations these are the actions you would need to add (you can name them anything you like).

Driver Heat 3: 209#FFFFFFFFF8FFFFFF
Driver Heat 2: 209#FFFFFFFFF7FFFFFF
Driver Heat 1: 209#FFFFFFFFF6FFFFFF
Driver Heat Off: 209#FFFFFFFFF5FFFFFF

Passenger Heat 3: 209#FFFFFFFFFFF8FFFF
Passenger Heat 2: 209#FFFFFFFFFFF7FFFF
Passenger Heat 1: 209#FFFFFFFFFFF6FFFF
Passenger Heat Off: 209#FFFFFFFFFFF5FFFF

Steering Heat On: 214#FFFF8FFFFFFFFFFF
Steering Heat Off: 214#FFFF5FFFFFFFFFFF

[canDO_Stef]

New iDrive 8.5 firmware is now available with fixes for heated seats, and additional functionality for heated steering wheel.

Please contact us if you have iDrive 8.5 for instructions for this update. An extra step, this time only, is required to pick up iD8.5-specific firmware.

Stef

[ssgm1x]

Originally Posted by TallGibbs

It seems like this a more advanced coding system than Bmercode. Is that correct?

Something in between bimmercode and ESYS if I’m understanding correctly?

Cando+ is kinda like the App IFTTT ( “if this then that “). It can run a series of settings at start up or at the push of a button . Amazing !!!!
Great work CanDo+ !!!!

[canDO_Stef]

Originally Posted by ssgm1x

Cando+ is kinda like the App IFTTT ( “if this then that “). It can run a series of settings at start up or at the push of a button . Amazing !!!!
Great work CanDo+ !!!!

Thanks!

[Don-DiGorno]

Really wanna be able to remote start in one of my M mode presets. Anyone have any idea if this is possible? Hate remote starting with the defaults. I wanna hear the exhaust!!!! lol

[Stea1thNinja]

Has anyone figured out using this as an exhaust flap controller? Ideally using the exhaust button as a trigger.

[canDO_Stef]

Originally Posted by Stea1thNinja

Has anyone figured out using this as an exhaust flap controller? Ideally using the exhaust button as a trigger.

As far as we can tell, there is no way without additional hardware.

....but on that subject, stay tuned!

[Viffermike]

[IMS M3]

Does anyone know whether you can use this at the same time as an AIM Solo2 DL plugged into the CAN-bus? From BMW DIY Guy's install video of this canDO+, it appears this plugs in by the transmission, while in dirtyfreebooter's install he plugs the AIM Solo2 DL into the CAN-bus by the passenger footwell. My goal is to be able to hit M1 at the track and go into track mode, while also recording throttle and brake data into the AIM.

Working with the CAN-bus is all new to me so figured someone may know right off the bat.

Thank you!

[Trogster]

Originally Posted by Stea1thNinja

Has anyone figured out using this as an exhaust flap controller? Ideally using the exhaust button as a trigger.

Just got this response from Kies:

-----------------------------------------------------------------------

Thank you for reaching out to us! I appreciate your inquiry regarding the configuration of our device for your 2023 G87 M2.

I’m pleased to confirm that our controllers can indeed be configured to actuate the exhaust flap. You will have the ability to set it to fully open or return to the factory closed position with the press of an assigned button. This flexibility allows you to customize your driving experience to your preference.

If you have any further questions or need assistance with the setup, please feel free to reach out. We're here to help!

Cheers,
Gary Seagrave III
General Manager
Kies Motorsports

----------------------------------------------------------------------

A bit confusing given the response from Stef at CanDo.

---------------------------------------------------------------------------

As far as we can tell, there is no way without additional hardware.

....but on that subject, stay tuned!

--------------------------------------------------------------------------

[Viffermike]

Originally Posted by Trogster

Just got this response from Kies:

-----------------------------------------------------------------------

Thank you for reaching out to us! I appreciate your inquiry regarding the configuration of our device for your 2023 G87 M2.

I’m pleased to confirm that our controllers can indeed be configured to actuate the exhaust flap. You will have the ability to set it to fully open or return to the factory closed position with the press of an assigned button. This flexibility allows you to customize your driving experience to your preference.

If you have any further questions or need assistance with the setup, please feel free to reach out. We're here to help!

Cheers,
Gary Seagrave III
General Manager
Kies Motorsports

----------------------------------------------------------------------

A bit confusing given the response from Stef at CanDo.

---------------------------------------------------------------------------

As far as we can tell, there is no way without additional hardware.

....but on that subject, stay tuned!

--------------------------------------------------------------------------

Would you trust your dealer to tell you what your car can do, or the manufacturer?

Stef = manufacturer rep
Gary = dealer rep (Kies distributes canDO+ units in the U.S.)

Stef is far, far more likely to be right. Just sayin'.

[AdonisP91]

Originally Posted by Viffermike

Would you trust your dealer to tell you what your car can do, or the manufacturer?

Stef = manufacturer rep
Gary = dealer rep (Kies distributes canDO+ units in the U.S.)

Stef is far, far more likely to be right. Just sayin'.

In principle you are right, but in this particular case both could potentially be somewhat correct.

Stef says there is no direct control of the flaps. He is correct. However perhaps he isn’t aware of indirect methods to control the flaps, which perhaps Kies is aware of.

For example: perhaps with the car in track mode or sport + the flaps are automatically open and with the car in comfort, the flaps are closed. So maybe Kies has in mind using the CanDo+ to change that mode.

Of course it wouldn’t be possible to close the flaps in track mode or open them in comfort.

[canDO_Stef]

Originally Posted by IMS M3

Does anyone know whether you can use this at the same time as an AIM Solo2 DL plugged into the CAN-bus? From BMW DIY Guy's install video of this canDO+, it appears this plugs in by the transmission, while in dirtyfreebooter's install he plugs the AIM Solo2 DL into the CAN-bus by the passenger footwell. My goal is to be able to hit M1 at the track and go into track mode, while also recording throttle and brake data into the AIM.

Working with the CAN-bus is all new to me so figured someone may know right off the bat.

Thank you!

There shouldn't be a problem doing so. Besides, if I understand the other device correctly, it connects to one of the _other_ CAN busses in the car :-)

[canDO_Stef]

Originally Posted by AdonisP91

In principle you are right, but in this particular case both could potentially be somewhat correct.

Stef says there is no direct control of the flaps. He is correct. However perhaps he isn’t aware of indirect methods to control the flaps, which perhaps Kies is aware of.

For example: perhaps with the car in track mode or sport + the flaps are automatically open and with the car in comfort, the flaps are closed. So maybe Kies has in mind using the CanDo+ to change that mode.

Of course it wouldn’t be possible to close the flaps in track mode or open them in comfort.

The reply from Gary really reads as if he is talking about the Kies Valve Controller, and not canDO+.

I can say with 100% assurance that there is (currently!) no way for our device to fully open the exhaust flaps.