[DO_e90]

Originally Posted by iifymbro

just picked her up earlier, very happy with the color!

Congrats! Just placed my order and got a build week for May 15th. I’m contemplating some of the m performance CF parts. Curious if anyone else has the rear spoiler and front splitter?

[iifymbro]

post-thunderstorm, really need MP HAS to get rid off the off-roader fender gap

[exmowner]

Originally Posted by iifymbro

yeah did it all myself, if not for the annoying waterspots it would've been really easy. Went over the whole car with dr. B paint cleanser until the spots were off, then went over it with dr. B decon then applied the ceramic which is easy too, mist distilled water on a panel then paint on the ceramic with their foam pads then dry/lightly buff with a fresh microfiber towel. No PPF cause rock chips aren't really a issue where I live, will use that money on forged wheels/MP HAS etc.

went with the regular ceramic coat this time, they have a $500 one that's better that I'll probably go with next time

Did you purchase distilled water or did you boil regular water?

I’m going to get around to coating my frozen grey this weekend. Well the doors and rear half as the rest is ppf’d.

[iifymbro]

Originally Posted by exmowner

Did you purchase distilled water or did you boil regular water?

I’m going to get around to coating my frozen grey this weekend. Well the doors and rear half as the rest is ppf’d.

bought distilled at the grocery store

[JR007]

Absolutely stunning...I need to see one in person.

[MADBMWX5MC]

Hell yeah, what a great looking color.

[BroDoze]

iifymbro So when you put the matte ceramic on your frozen paint, does that mean you could run it through a normal no-touch automatic wash? I think people fear there’s gloss enhancers in the soap (even if you don’t choose the wax options) that would “shine up” the frozen matte clear coat.
Does the matte ceramic help guard against that at all?

[iifymbro]

Originally Posted by BroDoze

iifymbro So when you put the matte ceramic on your frozen paint, does that mean you could run it through a normal no-touch automatic wash? I think people fear there’s gloss enhancers in the soap (even if you don’t choose the wax options) that would “shine up” the frozen matte clear coat.
Does the matte ceramic help guard against that at all?

yeah I wouldn't risk it with the automatic wash, should do hand washes only. The ceramic coat makes it really hydrophobic and easy to clean but any kind of gloss enhancer will likely de-matte the surface regardless. Doesn't have to be done that often either, hand wash every 3rd weekend or something should be fine unless you drive in really bad conditions and have to do it sooner, and keep the dr beasely's matte final finish around for any bird droppings or particularly nasty bugs that hit the paint inbetween washes

[chris719]

Originally Posted by BroDoze

iifymbro So when you put the matte ceramic on your frozen paint, does that mean you could run it through a normal no-touch automatic wash? I think people fear there’s gloss enhancers in the soap (even if you don’t choose the wax options) that would “shine up” the frozen matte clear coat.
Does the matte ceramic help guard against that at all?

The sealant or wax or gloss enhancing polymers in a touchless wash won't last that long. You can always wash the car with an alkaline soap and it will probably remove them anyway. Even if it is a problem, it's probably not a permanent one.

[BroDoze]

Originally Posted by chris719

The sealant or wax or gloss enhancing polymers in a touchless wash won't last that long. You can always wash the car with an alkaline soap and it will probably remove them anyway. Even if it is a problem, it's probably not a permanent one.

They sure don’t last long. I’ve got my favorite touch-free wash near the house and I’m convinced there are zero gloss enhancing anything in the cheap option (a good thing.) You have to select the higher options if you want the waxes n stuff. I just used it for a quick soap n rinse and it works great.
I’m willing to risk one wash after I get the frozen ceramic.

[iifymbro]

[BroDoze]

You're killing me. I've gotta wait all the way til November before my FPB '25 gets here. And really, then spring before I get to enjoy it!

Love your car man.

[Geighty7]

I would love to see one of these stanced with some proper wheels. I really love this color, super underrated imo.

[pukhtun]

Although i have zandvoot blue but just handed my car for a matte ppf. Will post pictures once i get the car back.

[Geighty7]

Originally Posted by pukhtun

Although i have zandvoot blue but just handed my car for a matte ppf. Will post pictures once i get the car back.

I did the same. Do not post here. Post in ZB thread. Keep FPB thread genuine.

[DO_e90]

Would getting satin PPF on it ruin the FPB look? My car is currently supposed to finish up on 5/17. Looking to do full PPF once I take delivery.

[BroDoze]

You mean matte PPF? It does change it slightly. There is slightly less depth to the matte/frozen look. Depends on the color of the car and brand of the PPF, though.

I’m not doing a full PPF for that reason, and I’m probably only going to do an 18 on the hood and fenders (and obviously full bumper, mirrors, headlights etc) and deal with the “line.” I want to see that hood in almost full, in-PPF’d glory. The lines have never bothered me and I’ve PPF’d all of my vehicles.

Matte PPF does much better with frozen paint, the brighter and lighter the color. Black is by far the worst. Drastic difference on PPF’d vs non with frozen black.

I think FPB will be great.

The best I’ve seen is the frozen grey. It was pretty hard identifying which panels were full PPF’d and which weren’t, at first. Once I knew, it was easy to tell it didn’t match, but that color is really good with matte PPF.

[BroDoze]

iifymbro Are you going to do a front lip eventually?

[iifymbro]

Originally Posted by BroDoze

iifymbro Are you going to do a front lip eventually?

Yeah might get the one that Geighty has

[iifymbro]

wash day, the ceramic coat makes it so easy

[tovel]

Originally Posted by iifymbro

wash day, the ceramic coat makes it so easy

Your car looks awesome! I am picking up my frozen blue this week. Very excited.

Do you have plans for after market wheels?

[iifymbro]

Originally Posted by tovel

Your car looks awesome! I am picking up my frozen blue this week. Very excited.

Do you have plans for after market wheels?

yep, probably the VT forged or something but I'm not in a rush, the stock ones are pretty nice despite being boat anchors. Will at least burn the stock rubber off first