|
|
12-30-2018, 02:45 PM | #1 |
Captain
326
Rep 872
Posts |
FS: Turner E9X Aluminum Undertray
Purchased new in late October 2018. Finally found time to install this weekend and discovered my SC intercooler piping prevents installation of the passenger side support bracket. Kinda pissed about that, but my fault. Willing to ship at my expense. $500 OBO.
__________________
AA Gen 2 Lvl 2 w/Meth; MagnaFlow catless x-pipe; Dinan Underdrive Pulley; VAC Coated Bearings; ARP Rod Bolts; Oil Diverter Valve; Dinan Strut Braces; Dinan Rear Toe Links; ECS Rear Trailing Arms; MCS 2-Way NR w/700F-1000R; GC Camber Plates; AKG 75D MM & 95A TM; CAE Shifter; Titan T-S5; StopTech ST60 380mm/ST40 355mm; MFactory DS; Zebulon Splitter; Zebulon 330 Rear Wing; Gutted w/Piper Motorsports Custom Cage; OMP WRC-R Seats
|
12-30-2018, 05:15 PM | #3 |
Captain
326
Rep 872
Posts |
__________________
AA Gen 2 Lvl 2 w/Meth; MagnaFlow catless x-pipe; Dinan Underdrive Pulley; VAC Coated Bearings; ARP Rod Bolts; Oil Diverter Valve; Dinan Strut Braces; Dinan Rear Toe Links; ECS Rear Trailing Arms; MCS 2-Way NR w/700F-1000R; GC Camber Plates; AKG 75D MM & 95A TM; CAE Shifter; Titan T-S5; StopTech ST60 380mm/ST40 355mm; MFactory DS; Zebulon Splitter; Zebulon 330 Rear Wing; Gutted w/Piper Motorsports Custom Cage; OMP WRC-R Seats
|
Appreciate
0
|
12-31-2018, 05:58 AM | #5 | |
Captain
326
Rep 872
Posts |
Quote:
Thanks for the plug!
__________________
AA Gen 2 Lvl 2 w/Meth; MagnaFlow catless x-pipe; Dinan Underdrive Pulley; VAC Coated Bearings; ARP Rod Bolts; Oil Diverter Valve; Dinan Strut Braces; Dinan Rear Toe Links; ECS Rear Trailing Arms; MCS 2-Way NR w/700F-1000R; GC Camber Plates; AKG 75D MM & 95A TM; CAE Shifter; Titan T-S5; StopTech ST60 380mm/ST40 355mm; MFactory DS; Zebulon Splitter; Zebulon 330 Rear Wing; Gutted w/Piper Motorsports Custom Cage; OMP WRC-R Seats
|
|
Appreciate
0
|
12-31-2018, 07:18 PM | #7 |
Captain
326
Rep 872
Posts |
Suppossed to be in the 15-18 lb range. I was suprised at the weight. However, the two suport brackets are very solid.
__________________
AA Gen 2 Lvl 2 w/Meth; MagnaFlow catless x-pipe; Dinan Underdrive Pulley; VAC Coated Bearings; ARP Rod Bolts; Oil Diverter Valve; Dinan Strut Braces; Dinan Rear Toe Links; ECS Rear Trailing Arms; MCS 2-Way NR w/700F-1000R; GC Camber Plates; AKG 75D MM & 95A TM; CAE Shifter; Titan T-S5; StopTech ST60 380mm/ST40 355mm; MFactory DS; Zebulon Splitter; Zebulon 330 Rear Wing; Gutted w/Piper Motorsports Custom Cage; OMP WRC-R Seats
Last edited by SonnyJack; 12-31-2018 at 07:29 PM.. |
Appreciate
0
|
01-01-2019, 07:19 AM | #9 |
Captain
326
Rep 872
Posts |
I think it will but can't say for certain. It's suppossed to slide into the bumper cover exactly like the stock part, but it is thicker and has no "give" to it. Probably will depend on your lip and how far back it extends. You need to be able to access the three holes on the underside of the cover to secure the cover to the undertray.
__________________
AA Gen 2 Lvl 2 w/Meth; MagnaFlow catless x-pipe; Dinan Underdrive Pulley; VAC Coated Bearings; ARP Rod Bolts; Oil Diverter Valve; Dinan Strut Braces; Dinan Rear Toe Links; ECS Rear Trailing Arms; MCS 2-Way NR w/700F-1000R; GC Camber Plates; AKG 75D MM & 95A TM; CAE Shifter; Titan T-S5; StopTech ST60 380mm/ST40 355mm; MFactory DS; Zebulon Splitter; Zebulon 330 Rear Wing; Gutted w/Piper Motorsports Custom Cage; OMP WRC-R Seats
|
Appreciate
1
MilehighM3915.00 |
01-07-2019, 01:18 PM | #10 |
Lieutenant
62
Rep 531
Posts |
I installed mine without using their support brackets and just re-used the OEM steel cables. I didn't want undertray impacts transferring directly to the frame, but obviously install it that way at your own risk.
__________________
Boston BMW CCA Autocross ///408 E90 M3 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|