[M2 SoCal]

Anyone know what this option is? It’s on my M2 order and not quite sure what that means.

[DomMuc]

https://g87.bimmerpost.com/forums/sh...14&postcount=4

its decoded cause in some states it´s not legal... you can activate no dazzle Highbeam with Bimmercode

[1stM]

This guy coded on his G80.

[cmgbk75]

How Anti-Dazzle looks in fog.

[cmgbk75]

Originally Posted by M2siast

Are those the high beams on?

Come on Canada! Yes, of course.

[Chet for short]

https://g87.bimmerpost.com/forums/sh...6#post30369922

Vid shows how to code for no-dazzle. Also goes through all other bimmercode settings.

[GregW / Oregon]

Originally Posted by M2siast

That is a different car though. I mean for the G87 it can’t be done.

From Bimmercode:

"Hi,

thanks for getting back to us - we are working on compatibility for the G87 but cannot promise a timeline yet.
--
Kind regards / Schöne Grüße
Sven Straubinger - Lead Developer
--
SG Software GmbH & Co. KG
Linsenäcker 18/1, 72379 Hechingen

Amtsgericht Stuttgart HRA 735678, Sitz: Hechingen
Persönlich haftende Gesellschafterin: SG Software Verwaltungs-GmbH
Amtsgericht Stuttgart HRB 769559, Sitz: Hechingen
Geschäftsführer: Stephan Gauch"

[cmgbk75]

Originally Posted by M2siast

That is a different car though. I mean for the G87 it can’t be done.

It’ll work for our car.

Side note, I drove about 60 miles late last night with cars sometimes front and oncoming cars and the Auto High Beams stayed on the entire time. It’s really cool watching the beam dance around the cars.

[cmgbk75]

Originally Posted by M2siast

So you coded yours? Can you share screenshots of the advanced options you changed?

Not this guy but he follows the same coding and it definitely works. It’s not complicated and takes less than 10 minutes.

[cmgbk75]

Originally Posted by M2siast

So you coded yours? Can you share screenshots of the advanced options you changed?

You’ll need two devices to do it. One with the instructions or screenshots (snap them from the video is probably the quickest. He posts the code. Example attached) and one connected to Bimmercode.

[cmgbk75]

Originally Posted by M2siast

I get it, but that’s a different car. I’m asking if you coded or if you can share your codes so I can compare.

And I’m telling you it will work in our car. Just log in as a G20 in Bimmercode.

[cmgbk75]

Originally Posted by M2siast

Ok I’ll try that then. I was just skeptic because Bimmercode says they don’t support it…

I hear you but they’ve said that about all the coding we’ve done so far. I promise you it’ll work. Just go slow. You have to use Expert mode.

[GregW / Oregon]

Originally Posted by cmgbk75

And I’m telling you it will work in our car. Just log in as a G20 in Bimmercode.

You log in as G20 instead of G82, or does it matter?

[cmgbk75]

Originally Posted by GregW / Oregon

You log in as G20 instead of G82, or does it matter?

I’ve used both G20 and G80 searching for more functionality, same results.

[GregW / Oregon]

So used Bimercode for the first time today. Pretty easy, but limited in things it can do. Biggest for me is getting rid of the legalese notice that pops up EVERY time you start the car, that you either have to click on OK or wait for it to go away. The key is linked to your profile, so if you've agreed to it once, why does BMW insist on annoying you for the life of your car (typically one model cycle, 7 years for me)?! That is so stupid. My Mercedes doesn't do that.

And I changed the one touch turn signal to 5 flashes, and got rid of the seat belt warning (always wear mine w/o thinking). Tomorrow I'll do the anti-dazzle coding.

[sl0m0]

Originally Posted by GregW / Oregon

So used Bimercode for the first time today. Pretty easy, but limited in things it can do. Biggest for me is getting rid of the legalese notice that pops up EVERY time you start the car, that you either have to click on OK or wait for it to go away. The key is linked to your profile, so if you've agreed to it once, why does BMW insist on annoying you for the life of your car (typically one model cycle, 7 years for me)?! That is so stupid. My Mercedes doesn't do that.

And I changed the one touch turn signal to 5 flashes, and got rid of the seat belt warning (always wear mine w/o thinking). Tomorrow I'll do the anti-dazzle coding.

Are you selecting g20 or g80?

[apez]

Two questions... Does the MT have ASS, and can it be coded out?

[cmgbk75]

Originally Posted by apez

Two questions... Does the MT have ASS, and can it be coded out?

Yes, but you don’t need to code it out. It’s default is off.

[cmgbk75]

Originally Posted by sl0m0

Are you selecting g20 or g80?

You can use either. End result is the same.

[cmgbk75]

Originally Posted by M2siast

You were right, of course. It does work. Yay!





For those who don't want to watch the video, or need the notes, all you have to do is:

Open Bimmercode
Choose 3 Series/M3

- Go into the BDC Module
- Choose Expert Mode
- Find the following options and change them to these settings:

LA1
C_BLC_PRE_ENA | 1
LUT_FLC_FORWARDLIGHTING_Y | AFS

LA2
C_AFS_ECO_LEVEL_3_ENA | 01
C_AFS_ENA | 01

LA3
LUT_AFS_CODRV_HOR | standard/init
LUT_AFS_DRV_HOR | F040_G005_AHL...
C_CLC_CURV_V2 | 23
C_CLC_CURV_V3 | 28
C_CLC_EXT_ENA | 01
C_HBA_DIM_ENA | 01
C_HBA_GFHBA_ENA_V_HI | 3C
C_HBA_GFHB_ENA | 01

- Hit "Code"
- Enjoy!

Glad you got it! Beating a dead horse, but it’s such a great feature and with it being legal now, I have no idea why they still decode it.

[apez]

Originally Posted by cmgbk75

Yes, but you don’t need to code it out. It’s default is off.

I can't tell you how relieving that is. I hate that "feature" on my G42.

[Chris13002]

Thanks for the help and making this easy M2siast
I also coded this and confirmed that it works through Bimmercode. Purchased OBDLink CX $80 on Amazon with same day delivery, and purchased the Bimmercode app for $50 on Android ($40 on Apple Store). Totally worth the money seeing the features you get with coding...

-Adjusted right passenger mirror tilt when in reverse to 70%
-Disable warnings when starting the car
-Bowers and Wilkins sound profile
-Thinking of disabling ASD (Active Sound Design = fake engine noises)

The "No-Dazzle" feature is my favorite and really wakes the car up at night. I drove through some dark empty roads and it lit everything up. Then when I got to a highway with some cars, just seeing the headlights constantly adjusting and moving around are amazing. No one got high-beamed, and it even adjusted it for a car on a perpendicular overpass.

Here is another video of what is does (not the same car but works exactly like this)...