[Mech Spec]

Originally Posted by mblaucoupe135

I didn't see any of these ASD options as all I am seeing is the option to make it active or inactive. I do have a 2025 and I've heard that the coding options are even more limited so maybe that's why I'm not seeing this.

You need to go into expert mode at the top of the screen when in the control unit to turn off the additional ASD options.

If you just do the easy mode switch it does not shut off a lot of the ASD sounds.

[mblaucoupe135]

Originally Posted by IanH

You need to go into expert mode at the top of the screen when in the control unit to turn off the additional ASD options.

If you just do the easy mode switch it does not shut off a lot of the ASD sounds.

I'll give that a shot! Thanks!

[cannockwolf]

Originally Posted by mblaucoupe135

Yeah i found this out the other day too when trying to code my 2025 m240. Super annoying as I despise that welcome screen. Lol

Am I the only one here not bottered about it? by the time ive got in started and look to do stuff its finished anyway

[WilcoJunoHotel]

Originally Posted by cannockwolf

Am I the only one here not bottered about it? by the time ive got in started and look to do stuff its finished anyway

I see no purpose for it so yes, it is useless and annoying. Also, switching modes (comfort, sport, etc.) initiates another stupid splash screen that takes seemingly forever to go away.

And lastly, having the entire dash and radio come on, and stay on, any time a car door is opened is also useless. I don't mind some lights coming on and maybe the center dash part of the screen but it is totally unnecessary for the entire dash to come alive. I haven't looked in Bimmercode but might be a way to disable this.

[inevitab1e]

Originally Posted by WilcoJunoHotel

Also, switching modes (comfort, sport, etc.) initiates another stupid splash screen that takes seemingly forever to go away.

You can disable the mode switch screen in ID8 without bimmercode. It's in settings.

[ifound2pac]

Has anyone confirmed that the antidazzle settings on the OP work with ID8?

[jammy8911]

Hoping someone can help.

I wanted to code the ambient lighting in my G42, it works via bimmercode except all my 'M' lights change to a single static colour instead of the Red, Blue & Light blue colours. This happens for the bit on the passenger dash above the glovebox as well as the door card lights by the handle. I just want to change the ambient lighting for the vehicle but leave all the M logos as the tri-colours

[Mech Spec]

In the advanced coding you can set the color codes of each individual light panel (if I am understanding from various YouTube videos)

Which ones you need to code and what you need to set them to, I cannot help you with that. I would ask bimmercode if they can add a setting to leave the door and dash lights as default.

[jammy8911]

Originally Posted by IanH

In the advanced coding you can set the color codes of each individual light panel (if I am understanding from various YouTube videos)

Which ones you need to code and what you need to set them to, I cannot help you with that. I would ask bimmercode if they can add a setting to leave the door and dash lights as default.

Figured it would be something like that. I thought the 'accent' setting in lighting would be it but it only allows one colour so still not tri-colour M badge.

[AdonisP91]

Originally Posted by Mech Spec

Here are the available modules. Still definitely some good stuff, but not nearly all that used to be available.

Code disable start stop does nothing.

Can disable ASD

Can change the ambient colors

Can disable seatbelt chime

Can adjust heated seat temp values and heated wheel memory.

Adding to the list: Can change the startup Driving Mode.

While I was changing the ambient lighting using the 3 series profile, I changed startup driving mode to Sports Individual at the same time and it seems to have stuck. The added benefit is that start/stop is off by default now when I start the car.

[mustiej]

Originally Posted by Pentland

Standard (and sometimes annoying) on UK models.

Does it turn off when you let go off the brakes automatically?


Question: Does the M cluster really do anything different other than making the layout even more 'vertical' and more blueish theme? Content wise it's the same right?

[Pentland]

Originally Posted by mustiej

Does it turn off when you let go off the brakes automatically?

Either switch them off manually or accelerate. It’s in the user manual.

[BlueLEDz]

Originally Posted by ifound2pac

Has anyone confirmed that the antidazzle settings on the OP work with ID8?

It’s possible to code anti dazzle in id8.
You have to go in advance mode in BimmerCode, but it’s possible.

I don’t remember the name of the thread.
Search the form there is a guide on what needs to be changed.

[blueeyesshined13]

anyone here able to figure out how to code in the iDrive 7 chime? I was able to do so but it plays the incorrect chime or the notification chime from idrive 7 when the car starts instead of the startup chime. Must have to go into expert mode I take it? I just miss and love the iDrive 6 and 7 chime so much lol